Oracle 1Z0-141, de formation et d'essai

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Oracle 1Z0-141 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Oracle 1Z0-141 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Oracle 1Z0-141 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Oracle 1Z0-141.

Le test Oracle 1Z0-141 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Oracle 1Z0-141 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Oracle 1Z0-141 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Oracle 1Z0-141 avec l'aide de Pass4Test.

Code d'Examen: 1Z0-141
Nom d'Examen: Oracle (Oracle9i forma Developer:build internet applications)
Questions et réponses: 138 Q&As

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Oracle 1Z0-141. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.

1Z0-141 Démo gratuit à télécharger: http://www.pass4test.fr/1Z0-141.html

NO.1 In a multiform application, one form must invoke another. The form modules are called
Customers and Orders internally, but the compiled files are saved as CUST.FMX and ORD.FMX,
respectively. There is a button in the Customers form with a When-Button-Pressed trigger to
invoke the Orders form. There is a requirement that only one Orders form can be running at a time,
so the trigger must check to see if the form is already open. If it is open, the focus must be sent to
it. If it is not open, it has to be opened. Which of these trigger codes will achieve the required
functionality?
A.IF NOT FIND_FORM('ord') THEN OPEN_FORM('ord'); ELSE GO_FORM('orders'); END IF;
B.IF ID_NULL(FIND_FORM('ord')) THEN OPEN_FORM('orders'); ELSE GO_FORM('ord'); END IF;
C.IF ID_NULL(FIND_FORM('orders')) THEN OPEN_FORM('ord'); ELSE GO_FORM('orders'); END IF;
D.IF NOT FIND_FORM('orders')) THEN OPEN_FORM('orders'); ELSE GO_FORM('ord'); END IF;
Correct:C

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.2 View the Exhibit. You are running a form in debug mode, but you have not set any breakpoints
in the code. You click a button that invokes the code shown in the exhibit. While the code
executes, you decide to examine the variable values in the loop. Which menu items in the Forms
Builder Debug menu would you choose?
A.Stop, Debug Windows > Variables
B.Pause, Debug Windows > Variables
C.Stop, Debug Windows > Form Values
D.Pause, Debug Windows > Form Values
E.Step Into, Debug Windows > Variables
F.Step Into, Debug Windows > Form Values
Correct:B

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.3 LibraryA and LibraryB are in the working directory of the Employees form. Library A is attached
to the Employees form. There is a stored procedure in the database called Raise_Salary which
must be called without any parameters. There is no Raise_Salary procedure in the form or in the
attached library. A When-Button-Pressed trigger in the Employees form contains this code:
raise_salary; Where does Forms search for the Raise_Salary procedure?
A.first in the attached library, then in the database
B.first in the form module, then in the attached library
C.first in the form module, then in the attached library, then in the database
D.first in the form module, then in the attached library, then in other libraries in the working directory, then
in the database
E.in the form module only
F.in the attached library only
G.in the database only
Correct:C

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.4 Which two statements correctly describe the relationship between a content canvas and a
window? (Choose two.)
A.Only one content canvas can be associated with a window.
B.Only one content canvas at a time can appear in a window.
C.One or more content canvases can be associated with a window.
D.A content canvas can be associated with two or more windows.
E.A content canvas cannot be larger than the window with which it is associated.
F.A maximum of two content canvases can appear in a window at the same time.
Correct:B C

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.5 You created a query Record Group at design time. Which built-in can you use to execute the
query defined in the Record Group object?
A.ADD_GROUP_ROW
B.POPULATE _GROUP
C.ADD_GROUP_COLUMN
D.SET_GROUP_SELECTION
E.CREATE_GROUP_FROM_QUERY
F.POPULATE _GROUP_WITH_QUERY
Correct:B

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.6 Your company assigns three possible credit ratings to customers: Poor, Good, and Excellent
(represented numerically by 1, 2, and 3). The DBA has just added a RATING column to the
CUSTOMERS table and has asked you to add an item to your form so that credit ratings can be
recorded. To restrict data entry clerks to one of these three values, you decide to create a radio
group for the Rating item. You want to allow for an undetermined (Null) credit rating, and users
should be able to update the credit rating from a value to an undetermined rating. How can you
implement this?
A.Create three radio buttons for each of the credit ratings, and set the Mapping of Other Values for the
radio group to Null.
B.Create three radio buttons for each of the credit ratings, and set the Mapping of Other Values for the
radio group to one of the credit rating values.
C.Create four radio buttons, and leave blank the value for the undetermined credit rating.
D.Choose a different type of input item, because radio groups do not allow entry and update of null values.
Correct:C

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.7 Consider the following scenario: In a multiform application, the user started in FormA. 1. From
FormA, the user invoked FormB using CALL_FORM. 2. From FormB, the user invoked FormC
using OPEN_FORM. 3. From FormC, the user invoked FormD using OPEN_FORM. 4. From FormB,
the user invoked FormE using CALL_FORM. There is an additional form in the application, called
FormF. Which statement is true?
A.FormF can be invoked from FormC using CALL_FORM.
B.FormF can be invoked from FormA using OPEN_FORM.
C.FormF can be invoked from FormD using CALL_FORM.
D.FormF can be invoked from FormE using CALL_FORM.
E.FormF can be invoked from FormB using OPEN_FORM.
Correct:D

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.8 View the Exhibit. You are modifying the New_Orders form. You want to change the navigation
order of the Orders block so that Order_Status is between Order_Date and Order_Mode in the
navigation order. You attempt to drag the Order_Status item in the Object Navigator (as shown in
the exhibit), but Forms does not allow you to release the item in the desired position. Why is this
happening, and what can you do to change the navigation order?
A.Because the data block is subclassed, you cannot change the order of items in the object navigator, but
you can change item properties to affect the navigation order.
B.Because the data block is subclassed, you can only drag objects to a lower position in the Object
Navigator, so you can drag Order_Mode and Customer_Id to a position below Order_Status.
C.Because the data block is subclassed, you will have to delete the object and then create it again in the
desired position.
D.Because the item is subclassed, you cannot change any of its properties.
Correct:A

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.9 You are developing a Human Resources form for HR clerks to insert, update, and delete
records from the EMPLOYEES table. When the user commits records, Forms displays the default
informative message "FRM-40400: Transaction complete: records applied and saved." You want
to replace that with the message "Records inserted: Records updated: Records deleted: ", where
represents the number of records inserted, updated, and deleted. Which triggers must you create
or modify to accomplish this?
A.On-Message only
B.Post-Commit and On-Message
C.Post-Database-Commit and On-Message
D.When-Validate-Record and On-Message
E.Post-Insert, Post-Update, Post-Delete, and On-Message
Correct:E

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.10 View the Exhibit. You are coding a When-New-Form-Instance trigger to populate a hierarchical
tree item called Emp_Tree that should initially appear as shown in the exhibit. Mr. King, the
president of the company, is the only employee who does not have a manager. In the trigger, you
declare a variable called rg_emps that is of the RECORDGROUP data type. You will use this record
group to populate the tree. You use the following code to create the record group: rg_emps :=
Create_Group_From_Query('rg_emps', 'select 1, level, last_name, NULL, to_char(employee_id)
from employees connect by prior employee_id = manager_id start with manager_id is null'); You
then programmatically populate the record group, and then populate the tree with the record
group. You run the form to test it. Will the tree initially appear as shown? If not, why not?
A.Yes, the tree will appear as shown.
B.No. The first element selected in the select statement should be 4 because you want four levels of the
tree to be displayed.
C.No. You should eliminate the last element selected in the select statement, because you do not want to
display the employee ID.
D.No. The "connect by" statement should be "connect by prior manager_id = employee_id".
Correct:A

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.11 You need to resize the INVENTORY tab canvas. The Viewport Width and Height properties are
200 and 300. You change the values to 150 and 120, respectively. What implication may this have
on your design?
A.Some tab pages may be obscured at run time.
B.By decreasing the Viewport Width property, some tab pages may be deleted.
C.Objects previously within the borders of a tab page may fall outside the tab page border, and you will
get compilation errors.
D.Objects previously within the borders of a tab page may fall outside the tab page border and will be
visible at run time only by navigating to them programmatically.
E.Objects previously within the borders of a tab page may fall outside the tab page border and will be
assigned to the null canvas.
Correct:C

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.12 In the Orders form you define five LOVs, and you create one button to be used to display any of
the LOVs. The button is enabled only when the user navigates to a field with an attached LOV. If
the user supplies only part of the required input data, the LOVs use that input as search criteria to
automatically reduce the LOV contents. If the LOVs hold only one value that can possibly match
user-supplied input, then the LOVs auto-complete the input field and are not displayed. Which
built-in and properties should you use to display the LOVs?
A.Use the List_Values(RESTRICT) built-in, and set the Mouse Navigate property value to NO.
B.Use the List_Values(RESTRICT) built-in, and set the Mouse Navigate property value to YES.
C.Use the List_Values(NO_RESTRICT) built-in, and set the Mouse Navigate property value to NO.
D.Use the List_Values(NO_RESTRICT) built-in, and set the Mouse Navigate property value to YES.
E.Use the Show_LOV built-in, and set the Mouse Navigate property value to YES.
F.Use the Show_LOV built-in, and set the Mouse Navigate property value to NO.
Correct:A

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.13 The two-column LOCATION Record Group has 10 rows. At run time, the user wants to mark two
or more LOCATION records for use by another Forms Builder object. The rows will be used to
construct a WHERE clause for a subsequent data block query. Which built-in enable individual
rows to be marked?
A.ADD_GROUP_COLUMN
B.SET_RECORD_PROPERTY
C.GET_GROUP_SELECTION
D.SET_GROUP_SELECTION
E.RESET_GROUP_SELECTION
F.GET_GROUP_RECORD_NUMBER
Correct:D

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.14 What type of message indicates a Forms message that cannot be suppressed?
A.a Busy message
B.a level 0 message
C.a Working message
D.a level 25 message
E.a level 50 message
F.a message with a level less than 0
G.a message with a level greater than 25
H.a message with a level greater than 50
Correct:G

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.15 You have the Orders form open in Forms Builder. You create an object group in the Orders form
and you try to drag various components in the Object Navigator to the object group. Which two
components will you be unable to place in the object group? (Choose two.)
A.the Orders block of the Orders form
B.the Order_CV canvas of the Orders form
C.the When-New-Item-Instance trigger of the Order_Items.Quantity item in the Orders from
D.the When-New-Form-Instance trigger of the Orders form
E.the Product_Id item in the Order_Items block of the Orders form
Correct:C E

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.16 To centralize some of your processing, you decide to write PL/SQL library modules that contain
procedures that can be called from form triggers or menu items. You need to populate some fields
based on values in other fields. Which code do you use?
A.IF FIND_ITEM('ORDERS.order_total') > 10000 THEN FIND_ITEM('ORDERS.large_order') := 'Y';
MESSAGE('WARNING - large order!'); END IF;
B.IF :ORDERS.order_total > 10000 THEN :ORDERS.large_order := 'Y'; MESSAGE('WARNING - large
order!'); END IF;
C.IF 'ORDERS.order_total' > 10000 THEN 'ORDERS.large_order' := 'Y'; MESSAGE('WARNING - large
order!'); END IF;
D.IF :ORDERS.order_total > 10000 THEN COPY('ORDERS.large_order','Y'); MESSAGE('WARNING -
large order!'); END IF;
E.IF NAME_IN('ORDERS.order_total') > 10000 THEN COPY('Y','ORDERS.large_order');
MESSAGE('WARNING - large order!'); END IF;
Correct:E

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.17 The Warehouse.fmb module contains two data blocks. You want to display items from each
data block on separate content canvases. You must ensure that both content canvases are visible
together at run time. Which two statements about content canvases are correct? (Choose two.)
A.A window cannot display more than one content canvas during a run time session.
B.A content canvas can be associated with a window by setting the Window property of the canvas.
C.Two or more content canvases can be displayed by associating each of them with a different window.
D.A content canvas can be associated with a window by setting the Primary Canvas property of the
window.
E.A content canvas can be associated with two or more windows by setting the Primary Canvas property
of the windows.
F.Two or more content canvases can be displayed by setting their viewports to be smaller than the
window with which they are to be associated.
Correct:B C

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.18 Which two statements about a Non-Query Record Group are true? (Choose two.)
A.The Record Group is associated with a query at run time or at design time.
B.The Record Group can be created and modified only at run time.
C.The Record Group can be created and modified only at design time.
D.The Record Group can be created and modified at design time or at run time.
E.You can modify the structure of this Record Group by adding columns and rows.
F.The Record Group is associated with a query only at design time.
Correct:B E

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.19 View the Exhibit. The EMPLOYEES table contains 100 records. You are developing a Human
Resources form that has an Employees block with properties as shown in the exhibit. When you
run the form and execute a query in the Employees block, approximately how many network
round trips will be made to the server before records are displayed in the block?
A.1
B.2
C.10
D.50
E.100
Correct:C

Oracle   1Z0-141   1Z0-141   1Z0-141

NO.20 You want to create a calculated item in the Control block of the Human Resources form. This
item will contain the total of employee salaries for employees in a particular department. Which
statement is true about how to create the calculated item?
A.You can create it by first creating a text item and then changing the item type.
B.You can create it in the Layout Editor using a special tool that creates a calculated item.
C.You can create it by first creating a display item and then setting appropriate properties in its Calculation
property group.
D.You can create it in the Layout Editor by selecting the Salary item of the Employees block, selecting the
Control block from the block list, clicking the Text Item tool, and drawing a text item on the canvas to
automatically calculate a sum of the selected Salary item.
Correct:C

Oracle   1Z0-141   1Z0-141   1Z0-141

Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Oracle 1Z0-141 est bien autorisé. Avec le certificat Oracle 1Z0-141, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Oracle 1Z0-141.

Le plus récent matériel de formation Oracle 1Z0-050

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.

Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Oracle 1Z0-050.

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Oracle 1Z0-050 à la première fois.

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Oracle 1Z0-050. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de 1Z0-050, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Code d'Examen: 1Z0-050
Nom d'Examen: Oracle (Oracle Database 11g: New Features for Administrators)
Questions et réponses: 183 Q&As

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Oracle 1Z0-050 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Oracle 1Z0-050 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Oracle 1Z0-050.

1Z0-050 Démo gratuit à télécharger: http://www.pass4test.fr/1Z0-050.html

NO.1 You are managing an Oracle Database 11g database with the ASM storage. The database is
having big file tablespaces. You want files to open faster and less memory to be used in the
shared pool to manage the extent maps. What configuration would you effect to achieve your
objective? (Choose all that apply.)
A.Set the ASM compatibility attribute for the ASM disk group to 11.1.0.
B.Set the RDBMS compatibility attribute for the ASM disk group to 11.1.0.
C.Set the COMPATIBLE initialization parameter for the ASM instance to 11.1.0.
D.Set the COMPATIBLE initialization parameter for the database instance to 11.1.0.
Correct:A D

Oracle   1Z0-050 examen   1Z0-050

NO.2 Identify the two direct sources from where SQL plans can be loaded into the SQL plan baselines.
(Choose two.)
A.Cursor cache
B.Stored outline
C.SQL Tuning Set
D.Automatic Workload Repository (AWR) snapshots
Correct:A C

Oracle   1Z0-050 examen   1Z0-050

NO.3 Which two statements about workload capture and replay operations are true? (Choose two.)
A.The clients must be created manually on the test machines to perform more realistic testing.
B.Restart the database in RESTRICTED mode before beginning workload replay to enable a clean state
for workload replay.
C.Restart the database in RESTRICTED mode before beginning workload capture to enable a clean state
for capturing the workload.
D.The application state of the capture system must be identical to the application state of the replay
system when the workload replay begins.
Correct:C D

Oracle   1Z0-050 examen   1Z0-050

NO.4 You are managing an Oracle Database 11g database. You want to take a backup on tape drives
of the USERS tablespace that has a single data file of 900 MB. You have tape drives of 300 MB
each. To accomplish the backup, you issued the following RMAN command: RMAN>BACKUP
SECTION SIZE 300M TABLESPACE users; What configuration should be effected to accomplish
faster and optimized backups by using the above command?
A.The SBT channel must be configured, with the MAXPIECESIZE set to 300 MB.
B.The SBT channel must be configured, with the parallelism setting for the SBT device set to 3.
C.The COMPATIBLE initialization parameter for the database instance must be set to at least 10.0.
D.The SBT channel must be configured, with the default parallelism setting for the SBT device set to 1.
Correct:B

Oracle   1Z0-050 examen   1Z0-050

NO.5 Which tasks can be accomplished using the Enterprise Manager Support Workbench in Oracle
Database 11g? (Choose all that apply.)
A.Generate reports on data failure such as data file failures.
B.You can package and upload diagnostic data to Oracle Support.
C.You can track the Service Request (SR) and implement repairs.
D.You can manually run health checks to gather diagnostic data for a problem.
Correct:B C D

Oracle   1Z0-050 examen   1Z0-050

NO.6 Which statement is true regarding the VALIDATE DATABASE command?
A.It checks the database for intrablock corruptions only.
B.It checks for block corruption in the valid backups of the database.
C.It checks the database for both intrablock and interblock corruptions.
D.It checks for only those corrupted blocks that are associated with data files.
Correct:A

Oracle   1Z0-050 examen   1Z0-050

NO.7 USER_DATA is a nonencrypted tablespace that contains a set of tables with data. You want to
convert all existing data in the USER_DATA tablespace and the new data into the encrypted format.
Which methods would you use to achieve this? (Choose all that apply.)
A.Use Data Pump to transfer the existing data to a new encrypted tablespace.
B.Use ALTER TABLE..MOVE to transfer the existing data to a new encrypted tablespace.
C.Use CREATE TABLE AS SELECT to transfer the existing data to a new encrypted tablespace.
D.Enable row movement for each table to be encrypted and then use ALTER TABLESPACE to encrypt
the tablespace.
E.Encrypt the USER_DATA tablespace using the ALTER TABLESPACE statement so that all the data in
the tablespace is automatically encrypted.
Correct:A B C

Oracle   1Z0-050 examen   1Z0-050

NO.8 Which two are the prerequisites to enable Flashback Data Archive? (Choose two.)
A.Undo retention guarantee must be enabled.
B.Database must be running in archivelog mode.
C.Automatic undo management must be enabled.
D.The tablespace on which the Flashback Data Archive is created must be managed with Automatic
Segment Space Management (ASSM).
Correct:C D

Oracle   1Z0-050 examen   1Z0-050

NO.9 You are managing the APPPROD database as a DBA. You plan to duplicate this database in the
same system with the name DUPDB. You issued the following RMAN commands to create a
duplicate database: RMAN> CONNECT target sys/sys@APPPROD RMAN> DUPLICATE TARGET
DATABASE TO dupdb FROM ACTIVE DATABASE DB_FILE_NAME_CONVERT
'/oracle/oradata/prod/', '/scratch/oracle/oradata/dupdb/' SPILE PARAMETER_VALUE_CONVERT
'/oracle/oradata/prod/', '/scratch/oracle/oradata/dupdb/' SET SGA_MAX_SIZE = '300M' SET
SGA_TARGET = '250M' SET LOG_FILE_NAME_CONVERT '/oracle/oradata/prod/redo/',
'/scratch/oracle/oradata/dupdb/redo/'; Which three are the prerequisites for the successful
execution of the above command? (Choose three.)
A.The source database should be open.
B.The target database should be in ARCHIVELOG mode if it is open.
C.RMAN should be connected to both the instances as SYSDBA.
D.The target database backups should be copied to the source database backup directories.
E.The password file must exist for the source database and have the same SYS user password as the
target.
Correct:B C E

Oracle   1Z0-050 examen   1Z0-050

NO.10 View the Exhibit to examine the parameter values. You are planning to set the value for the
MEMORY_TARGET parameter of your database instance. What value would you assign?
A.90 MB
B.272 MB
C.362 MB
D.1440 MB
Correct:C

Oracle   1Z0-050 examen   1Z0-050

NO.11 Which statements are true regarding the concept of problems and incidents in the fault
diagnosability infrastructure for Oracle Database 11g? (Choose all that apply.)
A.The problem key is the same as the incident number.
B.Every problem has a problem key, which is a text string that describes the problem.
C.The database makes an entry into the alert log file when problems and incidents occur.
D.The database sends an incident alert to the Oracle Enterprise Manager Database Home page.
E.Only the incident metadata and dumps are stored in the Automatic Diagnostic Repository (ADR).
Correct:B C D

Oracle   1Z0-050 examen   1Z0-050

NO.12 Which three statements about performance analysis by SQL Performance Analyzer are true?
(Choose three.)
A.It detects changes in SQL execution plans.
B.It produces results that can be used to create the SQL plan baseline.
C.The importance of SQL statements is based on the size of the objects accessed.
D.It generates recommendations to run SQL Tuning Advisor to tune regressed SQLs.
E.It shows only the overall impact on workload and not the net SQL impact on workload.
Correct:A B D

Oracle   1Z0-050 examen   1Z0-050

NO.13 You installed Oracle Database 11g and are performing a manual upgrade of the Oracle9i
database. As a part of the upgrade process, you execute the following script: SQL>@utlu111i.sql
Which statement about the execution of this script is true?
A.It must be executed from the Oracle Database 11g environment.
B.It must be executed only after the SYSAUX tablespace has been created.
C.It must be executed from the environment of the database that is being upgraded.
D.It must be executed only after AUTOEXTEND is set to ON for all existing tablespaces.
E.It must be executed from both the Oracle Database 11g and Oracle Database 9i environments.
Correct:C

Oracle   1Z0-050 examen   1Z0-050

NO.14 Evaluate the following block of code: BEGIN DBMS_NETWORK_ACL_ADMIN.CREATE_ACL ( acl
=> 'mycompany-com-permissions.xml', principal => 'ACCT_MGR', is_grant => TRUE, privilege =>
'connect'); DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL ( acl =>
'mycompany-com-permissions.xml', host => '*.mycompany.com'); END; What is the outcome of
the above code?
A.It produces an error because a fully qualified host name needs to be specified.
B.It produces an error because the range of ports associated with the hosts has not been specified.
C.It creates an access control list (ACL) with the user ACCT_MGR who gets the CONNECT and
RESOLVE privileges.
D.It creates an access control list (ACL) with the user ACCT_MGR who gets the CONNECT privilege but
not the RESOLVE privilege.
Correct:C

Oracle   1Z0-050 examen   1Z0-050

NO.15 View the Exhibit. Examine the following command that is executed for the TRANSPORT table in
the SH schema: SQL> SELECT DBMS_STATS.CREATE_EXTENDED_STATS('sh', 'customers_obe',
'(country_id, cust_state_province)') FROM dual; Which statement describes the significance of
this command?
A.It collects statistics into the pending area in the data dictionary.
B.It creates a virtual hidden column in the CUSTOMERS_OBE table.
C.It collects statistics with AUTO_SAMPLE_SIZE for ESTIMATE_PERCENT.
D.It creates a histogram to hold skewed information about the data in the columns.
Correct:B

Oracle   1Z0-050 examen   1Z0-050

NO.16 You want to take the backup of the USERS tablespace. It has a single data file of 900 MB.. You
have tape drives of 300 MB each. The SBT channel is configured for the RMAN. To accomplish the
backup, you issued the following RMAN command: RMAN> BACKUP SECTION SIZE 300M
TABLESPACE users; Which two statements are true regarding the execution of the above
command? (Choose two.)
A.The backup piece size will be limited to 300 MB.
B.The operation is accomplished using the default channel available.
C.The RMAN parallelizes the backup although the parallelism is not set for a channel.
D.Three channels for the tape drive must be configured by setting the parallelism to three.
Correct:A B

Oracle   1Z0-050 examen   1Z0-050

NO.17 When executing a SQL workload, you choose to generate execution plans only, without
collecting execution statistics. Which two statements describe the implications of this? (Choose
two.)
A.It produces less accurate results of the comparison analysis.
B.It automatically calls the SQL Tuning Advisor for recommendations.
C.It shortens the time of execution and reduces the impact on system resources.
D.Only the changes in the execution plan, and not performance regression, are detected.
Correct:A C

Oracle   1Z0-050 examen   1Z0-050

NO.18 Which statement describes the effect of table redefinition on the triggers attached to the table?
A.All triggers on the table remain valid.
B.All triggers on the table are invalidated and are automatically revalidated with the next DML execution
on the table.
C.All triggers on the table are invalidated and must be manually recompiled before the next DML
execution on the table.
D.Only triggers that are affected by the changes to the structure of the table are invalidated and
automatically revalidated with the next DML execution on the table.
Correct:B

Oracle   1Z0-050 examen   1Z0-050

NO.19 View the Exhibit exhibit1 to examine the series of SQL commands. View the Exhibit exhibit2 to
examine the plans available in the SQL plan baseline. The baseline in the first row of the Exhibit is
created when OPTIMIZER_MODE was set to FIRST_ROWS. Which statement is true if the SQL
query in exhibit1 is executed again when the value of OPTIMIZER_MODE is set to FIRST_ROWS?
A.The optimizer uses a new plan because none of the plans in the exhibit2 are fixed plans.
B.The optimizer uses the plan in the second row of the exhibit2 because it is an accepted plan.
C.The optimizer uses the plan in the first row of the exhibit2 because it is the latest generated plan.
D.The optimizer uses the plan in the first row of the exhibit2 because OPTIMIZER_MODE was set to
FIRST_ROW during its creation.
Correct:B

Oracle   1Z0-050 examen   1Z0-050

NO.20 Which steps are mandatory to enable Direct NFS? 1. Mount all required file systems using the
kernel NFS driver. 2. Create an oranfstab file containing the attributes for each NFS server to be
accessed using Direct NFS. 3. Replace the ODM library libodm11.so_stub with libodm11.so.
A.2 and 3
B.1 and 3
C.1 and 2
D.1, 2 and 3
Correct:B

Oracle   1Z0-050 examen   1Z0-050

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Oracle 1Z0-050. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Le matériel de formation de l'examen de meilleur Oracle 1Z0-055

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification Oracle 1Z0-055. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification Oracle 1Z0-055.

L'équipe de Pass4Test rehcerche la Q&A de test certification Oracle 1Z0-055 en visant le test Oracle 1Z0-055. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Oracle 1Z0-055 sans aucune doute.

Code d'Examen: 1Z0-055
Nom d'Examen: Oracle (Oracle Database 11g: New Features for 9i OCPs)
Questions et réponses: 150 Q&As

Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Oracle 1Z0-055, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.

Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test Oracle 1Z0-055 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification Oracle 1Z0-055.

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Oracle 1Z0-055. Le guide d'étude de Pass4Test comprend les excercices de Oracle 1Z0-055 et la Q&A qui peut vous permetrre à réussir 100% le test Oracle 1Z0-055. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.

But que Pass4Test n'offre que les produits de qualité est pour vous aider à réussir le test Oracle 1Z0-055 100%. Le test simulation offert par Pass4Test est bien proche de test réel. Si vous ne pouvez pas passer le test Oracle 1Z0-055, votre argent sera tout rendu.

La population de la Certification Oracle 1Z0-055 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

1Z0-055 Démo gratuit à télécharger: http://www.pass4test.fr/1Z0-055.html

NO.1 While performing the backup of the flash recovery area, you notice that one of the archived redo log
files is missing. You have multiple destinations for archived redo log files. What implications does it have
on the backup of the flash recovery area?
A. The backup succeeds but it would be without the missing archived log.
B. The backup fails because one of the archived redo log files is missing.
C. The backup succeeds because it fails over to one of the alternative archived redo log destinations.
D. During backup, you are prompted for the alternative destination for the missing archived redo log file.
Answer: C

Oracle   1Z0-055   1Z0-055 examen   1Z0-055

NO.2 You want to convert your existing non-ASM files to ASM files for the database PROD. Which method or
command would you use to accomplish this task?
A. Data Pump Export and Import
B. conventional export and import
C. the CONVERT command of RMAN
D. the BACKUP AS COPY.. command of RMAN
Answer: D

Oracle   1Z0-055 examen   certification 1Z0-055   certification 1Z0-055   1Z0-055 examen

NO.3 View the Exhibit to examine the error during the database startup.
You open an RMAN session for the database instance. To repair the failure, you executed the following as
the first command in the RMAN session:
RMAN> REPAIR FAILURE;
Which statement describes the consequence of the command?
A. The command performs the recovery and closes the failures.
B. The command only displays the advice and the RMAN script required for repair.
C. The command produces an error because the ADVISE FAILURE command has not been executed
before the REPAIR FAILURE command.
D. The command executes the RMAN script to repair the failure and removes the entry from the
Automatic Diagnostic Repository (ADR).
Answer: C

certification Oracle   1Z0-055   1Z0-055 examen   1Z0-055   certification 1Z0-055

NO.4 Which two statements are true with respect to the maintenance window? (Choose two.)
A. A DBA can enable or disable an individual task in all maintenance windows.
B. A DBA cannot change the duration of the maintenance window after it is created.
C. In case of a long maintenance window, all Automated Maintenance Tasks are restarted every four
hours.
D. A DBA can control the percentage of the resource allocated to the Automated Maintenance Tasks in
each window.
Answer: AD

Oracle   1Z0-055   1Z0-055 examen   1Z0-055 examen

NO.5 Examine the following PL/SQL block:
SET SERVEROUTPUT ON
SET LONG 10000
DECLARE report clob;
BEGIN
report := DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE();
DBMS_OUTPUT.PUT_LINE(report);
END;
Which statement describes the effect of the execution of the above PL/SQL block?
A. The plan baselines are verified with the SQL profiles.
B. All fixed plan baselines are converted into nonfixed plan baselines.
C. All the nonaccepted SQL profiles are accepted into the plan baseline.
D. The nonaccepted plans in the SQL Management Base are verified with the existing plan baselines.
Answer: D

Oracle examen   1Z0-055   1Z0-055

NO.6 In your database, the RESULT_CACHE_MODE parameter has been set to MANUAL in the
initialization parameter file.
You issued the following command:
SQL>SELECT /*+ RESULT_CACHE */ sale_category, sum(sale_amt)
FROM sales
GROUP BY sale_category;
Where would the result of this query be stored?
A. PGA
B. large pool
C. shared pool
D. database buffer cache
Answer: C

certification Oracle   1Z0-055 examen   1Z0-055   1Z0-055

NO.7 Which are the prerequisites for performing flashback transactions on your database? (Choose all that
apply.)
A. Supplemental log must be enabled.
B. Supplemental log must be enabled for the primary key.
C. Undo retention guarantee for the database must be configured.
D. Execute permission on the DBMS_FLASHBACK package must be granted to the user.
Answer: ABD

Oracle examen   1Z0-055   certification 1Z0-055   1Z0-055 examen

NO.8 You issued the following command:
CREATE GLOBAL TEMPORARY TABLE admin_work_area
(startdate DATE,
enddate DATE,
class CHAR(20))
ON COMMIT DELETE ROWS
TABLESPACE tbs_t1;
An index is then created on the ADMIN_WORK_AREA temporary table.
Which two statements are true regarding the TBS_T1 tablespace in the above command? (Choose two.)
A. It stores only the temporary table but not its indexes.
B. It stores both the temporary table as well as its indexes.
C. It must be a nondefault temporary tablespace for the database.
D. It can be a default or nondefault temporary tablespace for the database.
E. It must be the default temporary tablespace of the user who issues the command.
Answer: BD

Oracle   1Z0-055   1Z0-055

NO.9 View the Exhibit to examine the details for an incident.
Which statement is true regarding the status of the incident?
A. The DBA is working on the incident and prefers that the incident be kept in the ADR.
B. The incident is now in the Done state and the ADR can select the incident to be purged.
C. The incident has been newly created and is in the process of collecting diagnostic information.
D. The data collection for the incident is complete and the incident can be packaged and sent to Oracle
Support.
Answer: D

Oracle   1Z0-055   certification 1Z0-055   1Z0-055   1Z0-055 examen   1Z0-055

NO.10 Identify the activities performed as part of the Automatic SQL Tuning process in the maintenance
window? (Choose all that apply.)
A. generating the SQL profile
B. testing and accepting the SQL profile
C. generating a list of candidate SQLs for tuning
D. adding tuned SQL plans into the SQL plan baseline
E. tuning each SQL statement in the order of importance
F. generating baselines that include candidate SQL statement for tuning
Answer: ABCE

Oracle   1Z0-055   certification 1Z0-055

NO.11 Which of the following information will be gathered by the SQL Test Case Builder for the problems
pertaining to SQL-related problems? (Choose all that apply.)
A. ADR diagnostic files
B. all the optimizer statistics
C. initialization parameter settings
D. PL/SQL functions, procedures, and packages
E. the table and index definitions and actual data
Answer: BCE

Oracle examen   1Z0-055   1Z0-055   certification 1Z0-055   certification 1Z0-055

NO.12 An online tablespace, TEST_TBS, is full and you realize that no server-managed tablespace
threshold alerts were generated for the TEST_TBS tablespace. What could be the reason, if the
TEST_TBS tablespace does not include autoextensible data files?
A. TEST_TBS is a small file tablespace.
B. TEST_TBS is a bigfile tablespace (BFT).
C. TEST_TBS is the default temporary tablespace.
D. TEST_TBS is a dictionary-managed tablespace.
Answer: D

Oracle   certification 1Z0-055   1Z0-055 examen   1Z0-055 examen   1Z0-055

NO.13 View the Exhibit exhibit1.
In the CUSTOMERS_OBE table, when the value of CUST_STATE_PROVINCE is "CA", the value of
COUNTRY_ID is "US"
View the Exhibit exhibit2 to examine the commands and query plans.
The optimizer can sense 8 rows instead of 29 rows, which is the actual number of rows in the table. What
can you do to make the optimizer detect the actual selectivity?
A. Set the STATISTICS_LEVEL parameter to TYPICAL.
B. Change the STALE_PERCENT value for the CUSTOMERS_OBE table.
C. Set the OPTIMIZER_USE_PENDING_STATISTICS parameter to FALSE.
D. Create extended statistics for the CUST_STATE_PROVINCE and COUNTRY_ID columns.
Answer: D

certification Oracle   1Z0-055   1Z0-055   1Z0-055

NO.14 Which method would you use to undo the changes made by a particular transaction without affecting
the changes made by other transactions?
A. point-in-time recovery
B. execute the ROLLBACK command with transaction number
C. flashback the database to before the transaction was committed
D. determine all the necessary undo SQL statements from FLASHBACK_TRANSACTION_QUERY and
use them for recovery
Answer: D

Oracle   1Z0-055 examen   1Z0-055 examen   1Z0-055

NO.15 While deploying a new application module, the software vendor ships the application software along
with appropriate SQL plan baselines for the new SQLs being introduced. Which two statements describe
the consequences? (Choose two.)
A. The plan baselines can be evolved over time to produce better performance.
B. The newly generated plans are directly placed into the SQL plan baseline without being verified.
C. The new SQL statements initially run with the plans that are known to produce good performance
under standard test configuration.
D. The optimizer does not generate new plans for the SQL statements for which the SQL plan baseline
has been imported.
Answer: AC

Oracle examen   1Z0-055   1Z0-055 examen   certification 1Z0-055

NO.16 When executing a SQL workload, you choose to generate execution plans only, without collecting
execution statistics. Which two statements describe the implications of this? (Choose two.)
A. It produces less accurate results of the comparison analysis.
B. It automatically calls the SQL Tuning Advisor for recommendations.
C. It shortens the time of execution and reduces the impact on system resources.
D. Only the changes in the execution plan, and not performance regression, are detected.
Answer: AC

Oracle   certification 1Z0-055   1Z0-055 examen   certification 1Z0-055

NO.17 You performed an incomplete recovery and opened the database with the RESETLOGS option. The
LOG_ARCHIVE_FORMAT parameter is set to 'ora_%t_%s_%r.log'. Which statement regarding the
archived redo log files, created in an earlier incarnation of the database, is true?
A. The archived redo log files will be overwritten.
B. The archived redo log files are deleted automatically.
C. The archived redo log files should be moved to some other location.
D. The archived redo log files are still maintained because the file names are unique.
Answer: D

Oracle   1Z0-055   1Z0-055   1Z0-055   1Z0-055   1Z0-055

NO.18 Which setting enables the baselines by default in Oracle Database 11g?
A. setting the STATISTICS_LEVEL parameter to TYPICAL
B. adding filters to the Automatic Database Diagnostic Monitor (ADDM)
C. enabling Automated Maintenance Task using Oracle Enterprise Manager
D. setting the OPTIMIZER_USE_PENDING_STATISTICS parameter to TRUE
Answer: A

certification Oracle   certification 1Z0-055   certification 1Z0-055   certification 1Z0-055

NO.19 View the Exhibit for the object interdependency diagram.
The PRODUCTS table is used to create the PRODCAT_VW view.
PRODCAT_VW is used in the GET_DATA procedure.
GET_DATA is called in the CHECK_DATA function.
A new column PROD_QTY is added to the PRODUCTS table.
How does this impact the status of the dependent objects?
A. All dependent objects remain valid.
B. Only the procedure and function become invalid and must be recompiled.
C. Only the view becomes invalid and gets automatically revalidated the next time it is used.
D. Only the procedure and function become invalid and get automatically revalidated the next time they
are called.
Answer: A

Oracle   1Z0-055   1Z0-055 examen   certification 1Z0-055   1Z0-055   1Z0-055 examen

NO.20 Your system has been upgraded from Oracle Database 10g to Oracle Database 11g. You imported
SQL Tuning Sets (STS) from the previous version. After changing the OPTIMIZER_FEATURE_ENABLE
parameter to 10.2.0.4 and running the SQL Performance Analyzer, you observed performance regression
for a few SQL statements. What would you do with these SQL statements?
A. Set OPTIMIZER_USE_PLAN_BASELINES to FALSE to prevent the use of regressed plans.
B. Capture the plans from the previous version using STS and then load them into the stored outline.
C. Capture the plans from the previous version using STS and then load them into SQL Management
Base (SMB).
D. Set OPTIMIZER_CAPTURE_SQL_PLAN_BASELINES to FALSE to prevent the plans from being
loaded to the SQL plan baseline.
Answer: C

Oracle   1Z0-055 examen   1Z0-055 examen   1Z0-055

Pass4Test vous promet de vous aider à passer le test Oracle 1Z0-055, vous pouvez télécharger maintenant les Q&As partielles de test Oracle 1Z0-055 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Meilleur Oracle 1Z0-054 test formation guide

Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test Oracle 1Z0-054 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test Oracle 1Z0-054, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Oracle 1Z0-054.

Obtenez la Q&A de test Oracle 1Z0-054 de Pass4Test plus tôt, vous pouvez réussir le test Certification Oracle 1Z0-054 plus tôt.

Code d'Examen: 1Z0-054
Nom d'Examen: Oracle (Oracle Database 11g: Performance Tuning)
Questions et réponses: 192 Q&As

Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Oracle après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Oracle 1Z0-054. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

1Z0-054 Démo gratuit à télécharger: http://www.pass4test.fr/1Z0-054.html

NO.1 View Exhibit1 and examine the indexes on the CUSTOMERS table.
The statistics for the CUSTOMERS table have been updated recently by using the following command:
SQL> EXEC DBMS_STATS.GATHER_TABLE_STATS('SH','CUSTOMERS',method_opt=>'FOR ALL
INDEXED COLUMNS SIZE AUTO');
View Exhibit2 to examine a query plan. Even though the index is present on the COUNTRY_ID and
CUST_GENDER columns, the query uses a full table scan. What could be the reason?
A. because the histogram statistics for the COUNTRY_ID column are not updated
B. because the DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter is set to a high value
C. because the optimizer calculates the cost of accessing blocks by using a full table scan to be less as
compared to index scans, even though indexes are available
D. because indexes on CUST_GENDER and COUNTRY_ID columns are of different types, the index on
the CUST_GENDER column is bitmap index, and on COUNTRY_ID columns is btree index.
ANSWER: C

Oracle   certification 1Z0-054   certification 1Z0-054   1Z0-054

NO.2 The columns CUST_CITY, CUST_STATE_PROVINCE, and COUNTRY_ID are frequently used
together in the WHERE clause of the queries. The CUSTOMERS table is a big table with 20 GB of data.
You notice that the selectivity for these three columns varies from the selectivity that the optimizer
calculates.
What would you recommend to influence the selectivity calculated by the optimizer?
A. creating function-based indexes by concatenating all the columns
B. updating histogram statistics for these columns by using the DBMS_STATS.GATHER_TABLE_STATS
procedure
C. using the DBMS_STATS.CREATE_EXTENDED_STATS function to create a virtual column and create
index on the virtual column
D. using the DBMS_STATS.CREATE_EXTENDED_STATS function to create a virtual column and the
DBMS_STATS.GATHER_TABLE_STATS procedure to collect statistics on the virtual column
ANSWER: D

Oracle examen   certification 1Z0-054   1Z0-054 examen   certification 1Z0-054

NO.3 Which three factors influence the optimizer's behavior while choosing an optimization approach and
goal for a SQL statement? (Choose three.)
A.parsing of a SQL statement
B.operating system (OS) statistics
C.object statistics in the data dictionary
D.the OPTIMIZER_MODE initialization parameter
E.optimizer SQL hints for changing the query optimizer goal
ANSWER: CDE

Oracle   1Z0-054   1Z0-054   1Z0-054   1Z0-054

NO.4 View the Exhibit exhibit1 to examine the series of SQL commands and parameter settings.
View the Exhibit exhibit2 to examine the plans available in the SQL plan baseline.
The first plan (in red) is created when OPTIMIZER_MODE is set to ALL_ROWS and the second plan (in
blue) is created when OPTIMIZER_MODE is set to FIRST_ROWS.
Which SQL plan baseline would be used if the SQL query in exhibit1 is executed again when the value of
OPTIMIZER_MODE is set to FIRST_ROWS?
A. the second plan, because it is a fixed plan
B. the first plan, because it is an accepted plan
C. the second plan, because it is the latest generated plan in FIRST_ROW mode
D. A new plan, because the second plan in FIRST_ROW mode is not an accepted plan
ANSWER: B

Oracle   1Z0-054   1Z0-054   1Z0-054   1Z0-054 examen

NO.5 Identify two correct statements about the Active Session History (ASH) data. (Choose two.)
A.A part of SGA memory is used to store ASH data as rolling buffer.
B.The ASH data can be analyzed between any two small time intervals.
C.All ASH data in memory are flushed to disk by MMON in every 3 seconds.
D.All ASH data in memory are flushed to disk by MMNL process whenever the buffer is full.
ANSWER: AB

Oracle   1Z0-054 examen   1Z0-054   1Z0-054   1Z0-054   certification 1Z0-054

NO.6 You are working on a decision support system (DSS). The index is available on the COUNTRY_ID
column of the CUSTOMERS table.
View the Exhibit and examine the parameter settings and the query execution plan.
Why is the query using a full table scan instead of an index scan?
A. because the histogram statistics for the COUNTRY_ID column are not updated
B. because the index statistics for the index on the COUNTRY_ID column are not current
C. because the DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter is set to a higher value
D. because the optimizer predicts that most of the blocks in the table are accessed. Therefore, it uses a
full table scan, even though indexes are available.
ANSWER: D

Oracle examen   certification 1Z0-054   certification 1Z0-054   1Z0-054 examen   certification 1Z0-054   1Z0-054

NO.7 You work as a DBA for a company and you have the responsibility of managing one of its online
transaction processing (OLTP) systems. The database encountered performance-related problems and
you generated an Automatic Workload Repository (AWR) report to investigate it further.
View the Exhibits and examine the AWR report.
What could be the problem in this database?
A.Java pool is not configured.
B.The CPU in the system is slow.
C.The shared pool size is inadequate.
D.The database buffer cache is inadequate.
E.The OPEN_CURSORS parameter is set to a small value.
ANSWER: C

Oracle   1Z0-054   certification 1Z0-054   1Z0-054   1Z0-054

NO.8 A batch workload that historically completed in the maintenance window between 10:00 PM and
midnight is currently showing poor performance and completing at 2 AM.
To help in the diagnosis of the performance degradation, the senior DBA in your organization asks you to
execute the awrddrpt.sql script to produce a Compare Periods report.
Which two statements are true about the report produced by this script? (Choose two.)
A. It is refreshed automatically based on the moving window baseline.
B. It compares details between any two selected time periods of the same duration.
C. It normalizes the statistics by the amount of time spent on the database for each time period.
D. It compares details between two consecutive time periods of the same or different durations and is
refreshed every 60 minutes.
ANSWER: BC

Oracle   1Z0-054 examen   certification 1Z0-054

NO.9 Examine the initialization parameter values for the instance given below:
NAME TYPE VALUE
------------------------------------ ----------- ------------------
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.1.0.6
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
db_file_multiblock_read_count integer 64
The index created on the column used in the WHERE clause of the query. You notice that the query is not
using the index. Instead of an index scan, a full table scan is used.
View the Exhibit and examine the autotrace output for a query.
What could be the reason for it? (Choose all that apply.)
A. The OPTIMIZER_INDEX_COST_ADJ initialization parameter has a low value.
B. The DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter has a low value.
C. The statistics for the table and all the indexes associated with the table are not current.
D. The table has less than DB_FILE_MULTIBLOCK_READ_COUNT blocks under the high-water mark.
ANSWER: CD

Oracle examen   certification 1Z0-054   1Z0-054 examen

NO.10 You observed that some of the queries are performing poorly on the SALES_RECORDS table in your
database.
On further investigation, you find that at the end of each day the contents of the SALES_RECORDS table
are transferred to the SALES table and deleted from the SALES_RECORDS table. The deleted
operations cause the table to be sparsely populated.
You decided to use the ALTER TABLE...SHRINK SPACE COMPACT command to shrink the table.
Why would you choose this method? (Choose all that apply.)
A. because it can be used during peak hours
B. because it avoids unnecessary cursor invalidation
C. because it adjusts the high-water mark (HWM) immediately
D. because you have long-running queries that might span the shrink operation
E. because it does not allow any data manipulation language (DML) operations, thereby making the
shrink
operation faster
ANSWER: ABD

certification Oracle   1Z0-054   1Z0-054 examen   certification 1Z0-054

NO.11 View Exhibit1 to examine the description of the CUSTOMERS table.
The CUSTOMERS table has been updated heavily today. In a frequently used SQL statement, you notice
that estimated rows and the actual number of rows fetched differ greatly. The COUNTRY_ID column has
an index.
View Exhibit2 and examine the query execution plan.
What would you recommend to improve the optimizer's estimation?
A. setting the STATISTICS_LEVEL parameter to ALL
B. setting the OPTIMIZER_USE_PENDING_STATISTICS parameter to FALSE
C. creating extended statistics for the CUST_LAST_NAME, CUST_ID, and CUST_TOTAL columns
D. updating the statistics for the CUSTOMERS table by using the
DBMS_STATS.GATHER_TABLE_STATS
procedure
ANSWER: D

Oracle   1Z0-054   certification 1Z0-054

NO.12 You are working on an online transaction processing (OLTP) system. By day most of the application
users perform queries accessing the most recently added or modified rows. The applications have most
of the queries based on multiple tables. But at night, some batch processing is also done.
Which two actions would you recommend to choose a goal for the optimizer based on the needs of your
application? (Choose two.)
A.setting the OPTIMIZER_MODE parameter to ALL_ROWS at the instance level
B.setting the OPTIMIZER_MODE parameter to FIRST_ROWS_n at the instance level
C.asking the developer to add a hint /*ALL_ROWS*/ in the long-running batch processing queries
D.asking the developer to add a hint /*FIRST_ROWS_n*/ in the long-running batch processing queries
ANSWER: BC

Oracle   1Z0-054   1Z0-054 examen   certification 1Z0-054

NO.13 Examine the initialization parameter values for the instance given below:
NAME TYPE VALUE
------------------------------------ ----------- ------------------
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.1.0.6
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
db_file_multiblock_read_count integer 64
You notice that the one of the queries is using a full table scan (view Exhibit1) instead of index unique
scan (view Exhibit2). The index is present on the column that is accessed in the WHERE clause of the
query. The cost for a full table scan is more than that for an index unique scan.
Why would the optimizer choose full table scan over index unique scan? (Choose all that apply.)
A. The OPTIMIZER_INDEX_COST_ADJ initialization parameter is set to a low value.
B. The OPTIMIZER_INDEX_COST_ADJ initialization parameter is set to a high value.
C. The DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter is set to a low value.
D. The statistics for the table and all the indexes associated with the table are not current.
ANSWER: BD

Oracle   1Z0-054 examen   1Z0-054 examen   1Z0-054

NO.14 You plan to use adaptive thresholds as part of the performance tuning activity. You decide to increase
the window size of the default moving window baseline for all metric observations and comparisons in
your database. The following error occurs when you try to increase the window size through Enterprise
Manager:
Failed to commit: ORA-13541: system moving window baseline size (1296000) greater than retention
(1036800) ORA-06512: at "SYS.DBMS_WORKLOAD_REPOSITORY", line 601 ORA-06512: at line 2
Which action would allow you to perform the preceding task successfully?
A. increasing the flashback retention period
B. increasing the retention period for SQL Management Base
C. increasing the undo retention period for the database instance
D. increasing the Automatic Workload Repository (AWR) retention period
ANSWER: D

Oracle   certification 1Z0-054   certification 1Z0-054   1Z0-054   1Z0-054   1Z0-054

NO.15 View the Exhibit and examine a portion of the output obtained from the following query:
SQL> SELECT * FROM v$sys_time_model;
Select three correct interpretations of the time model statistics. (Choose three.)
A. DB time includes the wait time of all the nonidle and idle user sessions.
B. SQL execute elapsed time includes the time spent in performing fetches of query results.
C. DB CPU includes the CPU time spent on database user-level calls and background CPU time.
D. SQL execute elapsed time includes components of the hard parse elapsed time like bind elapsed time.
E. DB time includes the connection management call elapsed time excluding the background process
time.
ANSWER: BDE

Oracle   1Z0-054   1Z0-054   certification 1Z0-054

NO.16 View Exhibit1 to examine the description of the CUSTOMERS table.
You observed that optimizer selectivity is not accurate when the CUST_STATE_PROVINCE and
COUNTRY_ID columns are used together in the WHERE clause of a query.
View Exhibit2 to examine the query execution plan and the commands executed to gather the statistics.
The optimizer predicts that 20 rows will be processed rather than the 3,341 rows, which is the actual
number of rows returned from the table.
What can you do to make the optimizer detect the actual number of rows?
A. Set the STATISTICS_LEVEL parameter to ALL.
B. Set the OPTIMIZER_USE_PENDING_STATISTICS parameter to FALSE.
C. Create extended statistics for the CUST_STATE_PROVINCE and COUNTRY_ID columns.
D. Increase the STALE_PERCENT value for the CUSTOMERS table by using the
DBMS_STATS.SET_TABLE_PREFS procedure.
ANSWER: C

Oracle   1Z0-054   certification 1Z0-054   certification 1Z0-054

NO.17 A user in a session executed the following SQL statement to set the optimizer mode:
ALTER SESSION SET OPTIMIZER_MODE = ALL_ROWS
What impact would it have on the goal of the optimizer for that session? (Choose all that apply.)
A. Statement level OPTIMIZER_MODE hints take precedence over the session-level setting.
B. The OPTIMIZER_MODE parameter set at instance level takes precedence over the session-level
value.
C. The optimizer uses a cost-based approach, regardless of the presence of statistics; it optimizes with a
goal of best response time.
D. The optimizer uses a cost-based approach for all SQL statements in the session, regardless of the
presence of statistics; it optimizes with a goal of best throughput.
ANSWER: AD

Oracle examen   certification 1Z0-054   certification 1Z0-054   1Z0-054 examen   1Z0-054 examen   1Z0-054 examen

NO.18 You are working on an online transaction processing (OLTP) system. You detected free buffer waits
events for your database instance running in a machine that has multiple CPUs. You increased the
database buffer cache size as the first step. After a few hours of work on the database, further
investigation shows that the same event is being recorded.
What would be your next step to avoid this event in future?
A. Decrease the value of the DBWR_IO_SLAVES parameter.
B. Set the USE_INDIRECT_DATA_BUFFERS parameter to TRUE.
C. Increase the value of the DB_WRITER_PROCESSES parameter.
D. Increase the value of the DB_FILE_MULTIBLOCK_READ_COUNT parameter.
ANSWER: C

Oracle examen   1Z0-054   1Z0-054   certification 1Z0-054   certification 1Z0-054

NO.19 After running SQL Performance Analyzer (SPA), you observe a few regressed SQL statements in the
SPA output. Identify the two actions that you would suggest for these regressed SQL statements.
(Choose two.)
A.Running SQL Access Advisor
B.Adding them to SQL Plan Baseline
C.Submitting them to SQL Tuning Advisor
D.Running Automatic Database Diagnostic Monitor (ADDM)
ANSWER: BC

certification Oracle   1Z0-054   1Z0-054

NO.20 You are working on a development database that was upgraded to Oracle Database 11g from Oracle
Database 9i. An ADDM finding in this database says that the shared pool is inadequately sized, as shown
in the Exhibit.
You diagnosed that this is due to different kinds of workloads and this occurs only during peak hours. You
tried to resize this by shrinking the database buffer cache but that caused inadequate buffer cache
problems. The following are the related parameter settings:
SQL> show parameter sga
NAME TYPE VALUE
------------------------------ --------------- -----------------
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 300M
sga_target big integer 0
SQL> show parameter target
NAME TYPE VALUE
------------------------------ --------------- -----------------
.....
fast_start_mttr_target integer 0
memory_max_target big integer 0
memory_target big integer 0
pga_aggregate_target big integer 100M
sga_target big integer 0
You want to balance the memory between the System Global Area (SGA) components within SGA
without affecting the size of the Program Global Area (PGA).
Which action would solve this problem?
A. Set the SGA_TARGET parameter to 300M.
B. Set the SGA_MAX_SIZE parameter to 400M.
C. Set the MEMORY_TARGET parameter to 100M.
D. Set the MEMORY_MAX_TARGET parameter to 300M.
ANSWER: A

Oracle examen   1Z0-054   certification 1Z0-054   1Z0-054

Pass4Test vous promet de vous aider à passer le test Oracle 1Z0-054, vous pouvez télécharger maintenant les Q&As partielles de test Oracle 1Z0-054 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Le plus récent matériel de formation Oracle 1Z0-519

Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test Oracle 1Z0-519 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.

Participer au test Oracle 1Z0-519 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Oracle 1Z0-519 symbole bien la professionnalité d'un travailleur dans cette industrie.

Code d'Examen: 1Z0-519
Nom d'Examen: Oracle (Oracle EBS R12.1 Inventory Essentials)
Questions et réponses: 101 Q&As

Il y a nombreux façons à vous aider à réussir le test Oracle 1Z0-519. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test Oracle 1Z0-519 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test Oracle 1Z0-519 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.

C'est sûr que le Certificat Oracle 1Z0-519 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Oracle 1Z0-519, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Oracle 1Z0-519 peut bien tester la professionnalité de IT.

Il demande les connaissances professionnelles pour passer le test Oracle 1Z0-519. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Oracle 1Z0-519, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Oracle 1Z0-519 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Oracle 1Z0-519.

Pass4Test peut offrir nombreux de documentations aux candidats de test Oracle 1Z0-519, et aider les candidats à réussir le test. Les marétiaux visés au test Oracle 1Z0-519 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Oracle 1Z0-519 100%.

1Z0-519 Démo gratuit à télécharger: http://www.pass4test.fr/1Z0-519.html

NO.1 Beyond the shelf life days, active lots become expired lots.Expired lots______.
A. Canbe reserved
B. Arenot allowed to do subinventory transfer
C. Arenot included in Inventory valuation reports
D. Cannotbe transacted and included in on-hand quantities
E. Arenot included in cycle and physical counting adjustments
F. Arenot considered as on-hand supply for min-max and re-order point planning
Answer: F

Oracle   1Z0-519 examen   1Z0-519   1Z0-519 examen   1Z0-519

NO.2 Your customer is planning to dose the accounting period in Inventory. Before closing the period, the
customer would like toviewthe total number of pendingtransactionsin one form.
Whichform would provide this Information?
A. Pending Status
B. View MaterialTransactions
C. FindPendingTransactions
D. Transaction Open Interface
E. InventoryAccountingPeriod
Answer: E

certification Oracle   1Z0-519 examen   1Z0-519 examen   1Z0-519

NO.3 Which three statements are true about ABC Analysis and cycle count Classes? (Choose three.)
A. The hit/miss% for the Class overrides the hit/miss%ofthe cycle count header.
B. The hit/miss% for the cycle count header overrides the hit/miss%ofthe Class.
C. An ABC Analysis can be compiled for a sub inventory that is defined as a non-quantity-tracked sub
inventory.
D. An ABC Analysis can be compiled for nonasset (expensesubinventories for which quantities
aretracked).
E. In ABC Analysis, a quantity variance must always be submitted for approval, regardlessof thetolerance
levels
F. Positive and negative tolerances can be entered for each class, which will override the
tolerance at the cycle count header level
Answer: A,D,F

certification Oracle   certification 1Z0-519   certification 1Z0-519

NO.4 What two conditions prevent you from reserving the Inventory? (Choose two.)
A. The inventory module is installed as Shared.
B. The items have a nonreservable material status.
C. TheInventory is in a Standard Cost inventory organization.
D. TheInventory is in an Average Cost inventory organization.
E. The reservation will cause the on-hand quantity to be negative.
Answer: B,E

certification Oracle   1Z0-519   1Z0-519 examen

NO.5 ABCCompanyuses serial numbers for the following transactions:
1.Purchase order receipt
2. Miscellaneous receipt
3. Account alias receipt
The company wants to reuse the same serial numbers for work order completion transactions.
Which setup would allow it to reuse the same serial numbers?
A. INV: Validate Returned Serial: No
B. INV: Validate Returned Serial: Yes
C. INV: Restrict Receipt of Serials: No
D. INV: Restrict Receipt of Serials: Yes
E. INV: Validate Returned Lot: Yes and INV: Validate Returned Serial: No
F. INV: Restrict Receipt of Serials: Yes and INV: Validate Returned Serial: No
G. INV: Restrict Receipt of Serials: Yes and INV: Validate Returned Serial: Yes
Answer: C

Oracle   certification 1Z0-519   certification 1Z0-519   certification 1Z0-519   1Z0-519

NO.6 Which two functional areas have default category sets? (Choose two.)
A. Planning, Engineering, Costing
B. Purchasing, Payables, Inventory
C. Inventory, Purchasing, Bill of Materials
D. Order Management, Inventory, Purchasing
E. Inventory, Bill of Materials, Work in Process
F. Planning, Order Management, General Ledger
G. Order Management, Inventory, Work in Process
Answer: A,D

Oracle   certification 1Z0-519   1Z0-519 examen

NO.7 Which three statements are true about the item master? (Choose three.)
A. Itispossible to copy items across item master organizations.
B. The item master organization is the centralized repository for ail items in different organizations.
C. It is possible to associate items in one item master organization with another item master organization.
D. When an attribute control is set at the item master level, updates are not allowed at the item or
organization level.
E. There is no functional or technical difference between the item master organization and other
organizations while transacting on an item.
F. When an attribute control is set at the item master level, updates can still be made at the item or
organization level but these updates would not propagate back up to the item master level.
Answer: B,D,E

Oracle   1Z0-519 examen   1Z0-519 examen   1Z0-519

NO.8 XYZ Is a Chemicalmanufacturing company. On a daily basis, it produces 100 kilos of Item A from a
single production batch.
100 kilos of itemAmanufactured from a single batch has a single expiration date. However, the purity of
item A varies as follows:
Category 1: 95%
Category 2: 85%
Category 3: 50%
From an implementation perspective, which setup or process would meet this requirement?
A. Enable lot control. Map three categories asco products.
B. Enable lot control for Item A. Create three lots to represent the categories.
C. Enable lot control for item A. Create three child lots and link them with the parent lot.
D. Enable lot and grade control for item A. Have three categories mapped with grades.
E. Enable lot and serial control for item A. Create one lot and three categories that are mapped with serial
numbers.
Answer: D

Oracle examen   1Z0-519   1Z0-519   1Z0-519

NO.9 Oracle Inventory interacts with other Oracle applications by sharing information.
Which two pieces of information does Oracle Inventory receive from the Order Management application?
(Choose two.)
A. UOM information IS
B. shipping information
C. on-hand information
D. ATP supply information
E. reservations information
Answer: B,E

Oracle   1Z0-519 examen   1Z0-519   1Z0-519

NO.10 Select three true statements about inventory reservations. (Choose three.)
A. A reservation is a link between a supply source and a demand source.
B. For on-hand Inventory supply, thereisonly one type of reservation called high-level reservation.
C. For on-hand inventory supply, thereisonly one type of reservation called low-level reservation.
D. Reservations can be created only by Oracle applications or via forms. They cannot
beimportedfrom third-party applications.
E. A reservation creates a permanent data link between a supply source and a demand source, and
represents a guaranteed allotment of material to a specified demandsource.
F. Item reservations prevent the allocation of material you previously set aside for a sales order, account,
account alias, inventory allotment, user-defined source, process batch components or,
Oracle Complex Maintenance and Repair Overhaul work order components.
G. Item reservations allow the allocation of material you previously set aside for a sales order, account,
account alias, inventory allotment, user-defined source, process batch components or,
Oracle Complex Maintenance and Repair Overhaul work order components as long as the quantity is not
negative.
Answer: A,E,F

Oracle   1Z0-519 examen   1Z0-519   certification 1Z0-519   1Z0-519

NO.11 What is the correct sequence when defining units of measure (UOM)?
A. UOM Class, UOM, UOM Conversions
B. UOM Class, UOM Conversions, UOM
C. UOM Conversions, UOM Class, UOM
D. UOM Conversions, UOM, UOM Class
E. UOM, UOM Class, UOM Conversions
Answer: A

Oracle   1Z0-519 examen   1Z0-519 examen

NO.12 Which three statements are true about ABC analysis.? (Choose three,)
A. theABC classisan Item attribute.
B. There can be only three classes A, B, and C.
C. anABC class must be assigned to at least one ABC group.
D. ABC classes can be used to groupItems for planning purposes.
E. ABC classes can be used toidentifythe value groupings to which your Items belong.
Answer: C,D,E

certification Oracle   1Z0-519   1Z0-519   certification 1Z0-519

NO.13 You are moving items from locator A to locator B within the same Inventory organization. Which two
types of inventory transactions are required? (Choose two.)
A. Move Order
B. Locator transfer
C. Subinventory transfer
D. WIP component Issue
E. Miscellaneous Receipt
F. WIP assembly completion
G. Interorganization transfer direct
Answer: A,C

Oracle   1Z0-519 examen   1Z0-519   1Z0-519

NO.14 What are the prerequisites for performing an accurate ABC Compile for Inventory Items using the
Current on-hand value as the compile criterion?
A. Itemscosted only
B. Itemswith on-hand quantity only
C. Eitheritems with on-hand quantity or items costed
D. Both items with on-hand quantity and items costed
Answer: D

Oracle   1Z0-519   certification 1Z0-519   1Z0-519

NO.15 Yourclient has inventory organizations that belong to different operating units. All Items are
manufacturedinone operating unit and shipped to distribution warehouses that belong to other operating
units. On an exception basis, transfers may be arranged between distribution warehouses in different
operating units.
All transfers between operating units are at the shipping organization's standard cost plus a transfer
charge percentage.
Identify three inventory setup steps that are required for allowing the receiving inventory
organization to correctly process receipts from inventory organizations belonging to another operating unit.
(Choose three.)
A. Define an Intercompany Price List.
B. Define the correct Unit of Measure conversions for Dual UOM.
C. Define Intercompany Relations for each pair of operating units.
D. Define a separate Item Master Organization for each operating unit.
E. Define Receiving Options for each inventory organization in each operating unit.
F. Define Shipping Networks for each pair of shipping and receiving inventory organizations.
G. Ensure that the Receiving Options are uniform for ail inventory organizations in each
operatingunit.
Answer: C,E,F

certification Oracle   1Z0-519 examen   certification 1Z0-519   1Z0-519 examen   1Z0-519

Peut-être vous voyez les guides d'études similaires pour le test Oracle 1Z0-519, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test Oracle 1Z0-519 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

SAP meilleur examen C_HANAIMP_1, questions et réponses

Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A SAP C_HANAIMP_1 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de SAP C_HANAIMP_1 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.

Pass4Test vous promet de vous aider à passer le test SAP C_HANAIMP_1, vous pouvez télécharger maintenant les Q&As partielles de test SAP C_HANAIMP_1 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Code d'Examen: C_HANAIMP_1
Nom d'Examen: SAP (SAP Certified Application Associate - SAP HANA 1.0 )
Questions et réponses: 160 Q&As

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test SAP C_HANAIMP_1, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Vous n'avez besoin que de faire les exercices à propos du test SAP C_HANAIMP_1 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.

Il demande les connaissances professionnelles pour passer le test SAP C_HANAIMP_1. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat SAP C_HANAIMP_1, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Si vous vous inscriez le test SAP C_HANAIMP_1, vous devez choisir une bonne Q&A. Le test SAP C_HANAIMP_1 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.

C_HANAIMP_1 Démo gratuit à télécharger: http://www.pass4test.fr/C_HANAIMP_1.html

NO.1 Which of the following tasks must you perform before you build a business layer within the
SAP BusinessObjects Information Design Tool (IDT) on top of SAP HANA? (Choose three)
A. Publish the connection to CMS.
B. Build a query to test the connection.
C. Build a relational connection to SAP HANA.
D. Build an OLAP connection to SAP HANA.
E. Build a data foundation.
Answer: A,C,E

SAP   C_HANAIMP_1   C_HANAIMP_1 examen   certification C_HANAIMP_1   C_HANAIMP_1

NO.2 What are the key benefits of using SAP BusinessObjects Explorer with SAP HANA? (Choose
three)
A. You do not need to create your own queries to access information.
B. You can easily create your own queries to access information.
C. You can access information for data discovery intuitively.
D. You can execute ad-hoc business analytics quickly.
E. You can easily create an IDT business layer.
Answer: A,C,D

SAP examen   C_HANAIMP_1   C_HANAIMP_1 examen   C_HANAIMP_1

NO.3 Which new connection type is available as of SAP BusinessObjects Data Services 4.0?
A. Operational Data Provider
B. BAPI function calls
C. IDOCs
D. Read table via ABAP data flows
Answer: A

SAP   C_HANAIMP_1   C_HANAIMP_1 examen   C_HANAIMP_1   certification C_HANAIMP_1   C_HANAIMP_1 examen

NO.4 You have a Web Intelligence report that requires data from SAP HANA filtered for a specific
year.
Where do you apply the filter for optimal performance?
A. In the universe
B. In the Web Intelligence report
C. In the analytic view
D. In the calculation view using an attribute value variable
Answer: C

certification SAP   C_HANAIMP_1 examen   C_HANAIMP_1   C_HANAIMP_1

NO.5 What are benefits of using a business layer on top of SAP HANA? (Choose two)
A. An extra layer of granular security
B. Improved database calculation speed
C. Fast throughput via BICS connectivity
D. Users can use business names instead of technical names
Answer: A,D

certification SAP   C_HANAIMP_1   C_HANAIMP_1   C_HANAIMP_1 examen   C_HANAIMP_1

NO.6 Which of the following properties of a derived attribute view can you modify?
A. Description
B. Description mapping
C. Calculated attributes
D. Filters
Answer: A

SAP   certification C_HANAIMP_1   C_HANAIMP_1 examen   C_HANAIMP_1

NO.7 Which SAP BusinessObjects reporting tool should you use to answer ad-hoc questions and
interact with shared information?
A. Crystal Reports
B. Dashboards
C. Explorer
D. WebIntelligence
Answer: D

SAP   C_HANAIMP_1   certification C_HANAIMP_1   C_HANAIMP_1

NO.8 If you want to create or drop tables in a schema, which privilege type do you need?
A. SYSTEM
B. ANALYTIC
C. PACKAGE
D. SQL
Answer: D

SAP   C_HANAIMP_1   C_HANAIMP_1 examen   C_HANAIMP_1 examen   C_HANAIMP_1

NO.9 Which delivered role is mandatory for a system administrator in SAP HANA?
A. SYS_ADMIN
B. CONTENT_ADMIN
C. SAP_ALL
D. IC MODELER
Answer: B

SAP   C_HANAIMP_1   C_HANAIMP_1 examen   C_HANAIMP_1 examen

NO.10 How can you evaluate the speed of a calculation within the database? (Choose two)
A. Use the Data Preview function in the SAP HANA studio.
B. Execute a Web Intelligence report and check the duration of the previous refresh.
C. Execute an information space using SAP BusinessObjects Explorer.
D. Write and execute an appropriate SQL statement.
Answer: A,D

SAP examen   C_HANAIMP_1   certification C_HANAIMP_1

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification SAP C_HANAIMP_1. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification SAP C_HANAIMP_1.

Meilleur SAP C_GRCAC_10 test formation guide

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.

Vous aurez une assurance 100% à réussir le test SAP C_GRCAC_10 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test SAP C_GRCAC_10, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.

Code d'Examen: C_GRCAC_10
Nom d'Examen: SAP (SAP Certified Application Associate - SAP BusinessObjects Access Control 10.0)
Questions et réponses: 80 Q&As

Le test Certification SAP C_GRCAC_10 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test SAP C_GRCAC_10. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test SAP C_GRCAC_10.

Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test SAP C_GRCAC_10.

Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification SAP C_GRCAC_10, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test SAP C_GRCAC_10.

C_GRCAC_10 Démo gratuit à télécharger: http://www.pass4test.fr/C_GRCAC_10.html

NO.1 Which configuration parameters determine the content of the log generated by the SPM Log
Synch job? (Choose three)
A. Enable Risk Change log (1002)
B. Enable Authorization Logging (1100)
C. Retrieve System log (4004)
D. Retrieve OS Command log (4006)
E. Retrieve Audit log (4005)
Answer: C,D,E

SAP   C_GRCAC_10   C_GRCAC_10 examen

NO.2 What does assigning the Logical Group (SOD-LOG) type to a connector group allow you to do?
A. Run a cross-system analysis.
B. Use the connector group for transports to the target system.
C. Monitor the target system.
D. Use the connector group as a business role management landscape.
Answer: D

SAP   certification C_GRCAC_10   C_GRCAC_10
9. Who approves the review of the periodic segregation of duties?
A. Mitigation monitors
B. Role owners
C. Mitigation approvers
D. Risk owners
Answer: D

SAP   certification C_GRCAC_10   certification C_GRCAC_10
10. How are lines and columns linked in a BRFplus initiator decision table?
A. A column to a column through a logical OR
B. A column to a line through a logical OR
C. A column to a column through a logical AND
D. A line to a line through a logical AND
Answer: C

certification SAP   C_GRCAC_10   certification C_GRCAC_10   C_GRCAC_10 examen

NO.3 Which of the following objects can you maintain in the "Maintain Paths" work area of MSMP
workflow configuration? (Choose three)
A. Paths
B. Path versions
C. Rules for path mappings
D. Stage notification settings
E. Stages
Answer: A,D,E

SAP   C_GRCAC_10   C_GRCAC_10

NO.4 Your customer has created a custom transaction code ZFB10N by copying transaction FB10
and
implementing a user exit.
How can you incorporate the customer enhancement into the global rule set so that it will be
available for Risk Analysis?
A. Update security permissions in all relevant authorization objects, maintain the custom program
name in all relevant functions, and generate the access rules.
B. Update all relevant functions with ZFB10N, maintain the permission values for all relevant
authorization objects, and generate the access rules.
C. Update all relevant functions with ZFB10N, maintain the permission values in the relevant
access risk, and generate the global rule set.
D. Update the relevant access risk with ZFB10N, maintain access rules in all relevant functions,
and generate the global rule set.
Answer: B

certification SAP   certification C_GRCAC_10   C_GRCAC_10 examen   certification C_GRCAC_10   certification C_GRCAC_10

NO.5 What do you mitigate using Access Control?
A. Roles
B. Users
C. Risks
D. Functions
Answer: C

SAP   C_GRCAC_10   C_GRCAC_10 examen

NO.6 Your customer wants a manager to fulfill both MSMP workflow agent purposes.
How do you configure this?
A. Maintain the manager agent twice, once for each purpose, using the same agent ID.
B. Maintain the manager agent once and assign both purposes to it without using an agent ID.
C. Maintain the manager agent twice, once for each purpose, using different agent IDs.
D. Maintain the manager agent once and assign both purposes to it using the same agent ID.
Answer: C

SAP examen   C_GRCAC_10   C_GRCAC_10 examen

NO.7 You have identified some risks that need to be defined as cross-system risks. How do you
configure your system to enable cross-system risk analysis?
A. 1. Set the analysis scope of the function to cross-system.
2. Create cross-system type connectors.
3. Assign the corresponding connectors to the appropriate connector group.
4. Generate rules.
B. 1. Set the analysis scope of the risk to cross-system.
2. Create cross-system type connectors.
3. Assign the corresponding connectors to the appropriate connector group.
4. Generate rules.
C. 1. Set the analysis scope of the risk to cross-system.
2. Create a cross-system type connector group.
3. Assign the corresponding connectors to the connector group.
4. Generate rules.
D. 1. Set the analysis scope of the function to cross-system.
2. Create a cross-system type connector group.
3. Assign the corresponding connectors to the connector group.
4. Generate rules.
Answer: D

SAP   certification C_GRCAC_10   C_GRCAC_10 examen

NO.8 Your customer wants to eliminate false positives from their risk analysis results.
How must you configure Access Control to include organizational value checks when performing a
risk analysis? (Choose two)
A. Configure organization rules for each relevant function.
B. Update the functions that contain each relevant action by activating the fields for the required
permissions and maintaining a value for each specific organization.
C. Configure organization rules for each relevant risk.
D. Update the functions that contain each relevant action by activating the fields for the required
permissions.
E. Configure organization level system parameters to incorporate all organization levels for each
relevant risk.
Answer: C,D

SAP examen   C_GRCAC_10 examen   certification C_GRCAC_10   certification C_GRCAC_10   C_GRCAC_10   C_GRCAC_10

Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.