Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test IBM 000-744 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test IBM 000-744 réel est lancée. C'est possible à réussir 100% avec le produit de IBM 000-744. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.
Code d'Examen: 000-744
Nom d'Examen: IBM (DS4000 Technical Version 1)
Questions et réponses: 140 Q&As
Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test IBM 000-744.
Pass4Test est un seul site de provider le guide d'étude IBM 000-744 de qualité. Peut-être que vous voyiez aussi les Q&A IBM 000-744 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
000-744 Démo gratuit à télécharger: http://www.pass4test.fr/000-744.html
NO.1 In the Major Event Log (MEL), what does immediate Availability Initialization (IAF) completed on
logical drive" indicate?
A. The drive has been internally reformatted.
B. The drive has just become accessible by the host.
C. LUN has just been replaced.
D. Hot sparing has occurred.
Answer: A
IBM examen certification 000-744 000-744 000-744
NO.2 What best describes a drive in eplaced status?
A. a drive that has replaced a failed drive and needs to be revived in order to complete the data recovery
process
B. a temporary status for a drive that has replaced a failed drive, but has not yet been reconstructed
C. a hot spare that has spared out for a failed drive in an array causing the hot spare to become the active
drive in the array
D. the final state of a drive that has replaced a failed drive and has been reconstructed
Answer: B
IBM 000-744 000-744 000-744
NO.3 A customer is combining two separate IT operations in one central location. They are using a DS4800.
Performance has been marginal. You look at the DS4800 Performance Monitor and observe that they are
well within the DS4800 performance specifications. Which tool can be used to determine the cause of the
problem?
A. Capacity Magic
B. Bandwidth Estimator
C. IOMeter
D. Disk Magic
Answer: D
certification IBM 000-744 examen certification 000-744 certification 000-744 000-744 000-744 examen
NO.4 You arrive at a customer site to implement the DS4000 solution and find that the customer wants to use
RAID 1+0 instead of RAID 5 for everything. What is a possible concern in this situation?
A. capacity
B. random IO performance
C. throughput performance
D. disk rebuild times
Answer: A
IBM certification 000-744 000-744
NO.5 To generate a premium feature key that can be installed on a DS4000 subsystem, you must provide
certain information to IBM. This information includes the IBM machine type/model and what additional
information?
A. serial number, activation code, feature enable identifier and e-mail address
B. serial number, activation code, and e-mail address
C. activation code, e-mail address, controller firmware level
D. serial number, and e-mail address, drive firmware level
Answer: A
IBM examen 000-744 000-744
NO.6 When configuring a customer's multimedia sequential I/O environment, what must you do?
A. use a small segment size with many disks
B. select a stripe size that is the same or an even multiple of the I/O size
C. use small segment size in conjunction with RAID 0
D. select a segment size that minimizes the occurrences of a single I/O on multiple drives
Answer: B
IBM examen 000-744 000-744 certification 000-744 certification 000-744
NO.7 In addition to the storage administrator's e-mail address, what information do you need to set up
e-mail alerts to be sent to the storage administrator?
A. sender's SMTP server address, the sender's e-mail address
B. sender's POP server address, the sender's e-mail address
C. storage administrator's POP server address, the sender's e-mail address
D. storage administrator's SMTP server address, the sender's e-mail address
Answer: A
IBM examen 000-744 examen 000-744
NO.8 In the exhibit, which management method is being used?
A. in-band
B. rlogin
C. client-host-band
D. out-of-band
Answer: D
IBM certification 000-744 000-744 certification 000-744 000-744 examen
NO.9 What is one disadvantage of managing a storage subsystem through the Fibre Channel IO path?
A. The fibre cable used for data IO cannot be used for management commands.
B. An access logical drive is required to communicate with the controllers.
C. Management commands cannot be encapsulated by the Fibre Channel protocol.
D. Ethernet cables to the controllers are also required to send management commands.
Answer: B
certification IBM 000-744 000-744 000-744
NO.10 What is the minimum number of HDDs required for RAID 6?
A. 1
B. 2
C. 3
D. 4
Answer: D
certification IBM certification 000-744 000-744 000-744 000-744 examen
NO.11 Three hosts are redundantly connected to a DS4000 system. Two are running a non-clustered
Windows 2003 Server and the other is running Red Hat Linux. How many Storage Partitions are used in
this configuration?
A. 0
B. 1
C. 3
D. 8
Answer: C
IBM 000-744 examen 000-744 000-744 000-744
NO.12 When examining a profile you see the following:
Drive at Enclosure 5, Slot 8 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 8]
How should this be configured for enclosure loss protection?
A. Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 9]
B. Drive at Enclosure 3, Slot 1 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 3, slot 1]
C. Drive at Enclosure 5, Slot 17 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 17]
D. Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 15, slot 19]
Drive at Enclosure 15, Slot 19 [mirrored pair with drive at enclosure 5, slot 9]
Answer: B
IBM 000-744 000-744 examen certification 000-744 000-744 examen
NO.13 Which statement is FALSE regarding hot spare drives in the DS4000 subsystem?
A. The storage server will attempt to find a spare in the same enclosure as the failed drive first.
B. The storage server will give preference to a spare the same size as the failed drive.
C. The storage server will use a spare with at least the same capacity as the failed drive.
D. The controller may use a spare that is larger than the failed drive and block the remaining capacity
from use.
Answer: B
IBM certification 000-744 000-744 000-744
NO.14 How do you configure SNMP traps in the Storage Manager GUI?
A. from the Subsystem Management window, use the Storage Subsystem menu
B. from the Subsystem Management window, use the Advanced menu
C. from the Enterprise Management window, use the Advanced menu
D. from the Enterprise Management window, use the Edit menu
Answer: D
certification IBM 000-744 examen 000-744 000-744 000-744 000-744
NO.15 Which statement about DS4000 firmware upgrades is true?
A. The controller firmware and NVSRAM files are closely tied to each other and must be installed in the
proper combination.
B. Controller firmware and NVSRAM upgrades always require the ESM firmware to be upgraded at the
same time.
C. Only one controller must be accessible via the Ethernet or fiber in order to perform a controller
firmware upgrade.
D. The controller firmware and NVSRAM are independent from each other and can be upgraded at
different times.
Answer: A
certification IBM 000-744 certification 000-744 000-744 certification 000-744
NO.16 What does a flashing green LED on a drive indicate?
A. status ok
B. drive active
C. failed drive
D. hot spare in use
Answer: B
IBM 000-744 certification 000-744 000-744 000-744
NO.17 A customer wants to use SATA drives to reduce costs. Which application matches SATA use?
A. TSM
B. Exchange
C. application with low IOPS
D. write once, read many times
Answer: C
certification IBM 000-744 000-744 examen 000-744 000-744 examen
NO.18 When creating a FlashCopy of a logical drive, a repository logical drive is created. The repository
logical drive is for metadata and copy-on-write data when a change is made to the FlashCopy source
logical drive. By default, what is its size?
A. 10% of the source volume
B. 20% of the source volume
C. 50% of the source volume
D. 100% of the source volume
Answer: B
IBM 000-744 certification 000-744
NO.19 You have been called in to assist the storage administrator who has been using Global Mirror with an
Enhanced Remote Mirroring (ERM) configuration to mirror the company inventory database from
headquarters to a data warehouse at a remote site. The storage administrator has been re-evaluating this
approach and needs your help to change the mirroring mode to Metro Mirroring for better control over
data going to the remote site. What must you do to help the storage administrator make the change?
A. advise the storage administrator to purchase two new licenses
B. break and re-establish the mirror relationship
C. back up the inventory data to tape
D. make the mode change in Storage Manager
Answer: D
certification IBM 000-744 000-744 000-744
NO.20 When performing an array migration, what is NOT required?
A. verification that there is no logical drive name duplication between the source and target systems
B. removal of mappings for all logical drives within the array being migrated
C. documenting the stripe order of the drives in the array for proper placement on the target subsystem
D. Advanced Maintenance Place Array Offline
Answer: C
IBM examen 000-744 examen 000-744 examen 000-744
L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification IBM 000-744. Les documentations particulièrement visée au test IBM 000-744 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test IBM 000-744.
没有评论:
发表评论