Le Certificat de Microsoft 70-410 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Microsoft 70-410, c'est-à-dire avoir une grande fortune. Le Certificat Microsoft 70-410 peut bien tester des connaissances professionnelles IT. La Q&A Microsoft 70-410 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Après une longue attente, les documentations de test Microsoft 70-410 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Microsoft 70-410 à la première fois.
Vous allez choisir Pass4Test après essayer une partie de Q&A Microsoft 70-410 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Microsoft 70-410.
Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test Microsoft 70-410 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification Microsoft 70-410.
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
Code d'Examen: 70-410
Nom d'Examen: Microsoft (Installing and Configuring Windows Server 2012)
Questions et réponses: 143 Q&As
Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Microsoft 70-410 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Microsoft 70-410.
Finalement, la Q&A Microsoft 70-410 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Microsoft 70-410 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Microsoft, vous aurez un meilleur salaire et une plus grande space à se développer.
70-410 Démo gratuit à télécharger: http://www.pass4test.fr/70-410.html
NO.1 You install Windows Server 2012 on a standalone server named Server1.You configure Server1
as a VPN server.You need to ensure that client computers can establish PPTP connections to
Server1.Which two firewall rules should you create? (Each correct answer presents part of the
solution.Choose two.)
A.an inbound rule for TCP port 1723
B.an inbound rule for protocol 47
C.an inbound rule for TCP port 1701
D.an outbound rule for TCP port 1723
E.an outbound rule for protocol 47
F.an outbound rule for TCP port 1701
Answer: AB
Microsoft certification 70-410 70-410 examen
NO.2 Your network contains an Active Directory domain named adatum.com.The domain contains
several
thousand member servers that run Windows Server 2012.All of the computer accounts for the
member
servers are in an organizational unit (OU) named ServersAccounts.Servers are restarted only
occasionally.You need to identify which servers were restarted during the last two days.What should
you
do?
A.Run dsquery serverand specify the oparameter.
B.Run Get-ADComputerand specify the SearchScopeparameter.
C.Run Get-ADComputerand specify the lastLogonproperty.
D.Run dsquery computerand specify the stalepwdparameter.
Answer: C
Microsoft 70-410 examen 70-410 70-410 70-410 examen
NO.3 Your network contains an Active Directory domain named contoso.com.You log on to a domain
controller
by using an account named Admin1.Admin1 is a member of the Domain Admins group.You view the
properties of a group named Group1 as shown in the exhibit.(Click the Exhibit button.) Group1 is
located
in an organizational unit (OU) named OU1.You need to ensure that users from Group1 can modify
the
Security settings of OU1 only.What should you do from Active Directory Users and Computers?
A.Modify the Security settings of Group1.
B.Modify the Managed By settings on OU1.
C.Right-click contoso.com and select Delegate Control.
D.Right-click OU1 and select Delegate Control.
Answer: D
certification Microsoft 70-410 examen 70-410 certification 70-410
NO.4 You have a server that runs Windows Server 2012.The disks on the server are configured as shown
in the
exhibit.(Click the Exhibit button.) You need to create a storage pool that contains Disk 1 and Disk
2.What
should you do first?
A.Convert Disk 1 and Disk 2 to dynamic disks.
B.Delete volume E.
C.Convert Disk 1 and Disk 2 to GPT disks.
D.Create a volume on Disk 2.
Answer: B
certification Microsoft 70-410 70-410 70-410
NO.5 Your network contains a file server named Server1 that runs Windows Server 2012.All client
computers
run Windows 8.You need to ensure that when users are connected to the network, they always use
local
offline files that are cached from Server1.Which Group Policy setting should you configure?
A.Turn on economical application of administratively assigned Offline Files.
B.Configure slow-link mode.
C.Configure Slow link speed.
D.Enable file synchronization on costed networks.
Answer: B
certification Microsoft 70-410 70-410 70-410 certification 70-410
NO.6 Your network contains an Active Directory domain named adatum.com.The computer
accounts for allmember servers are located in an organizational unit (OU) named Servers.You link a
Group Policy object(GPO) to the Servers OU.You need to ensure that the domain s Backup Operators
group is a member of the local Backup Operators group on each member server.The solution must
not remove any groups from the local Backup Operators groups.What should you do?
A.Add a restricted group named Backup Operators.Add adatum\Backup Operators to the This group
is a
member of list.
B.Add a restricted group named Backup Operators.Add adatum\Backup Operators to the Members
of this
group list.
C.Add a restricted group named adatum\Backup Operators.Add Backup Operators to the This group
is a
member of list.
D.Add a restricted group named adatum\Backup Operators.Add Backup Operators to the Members
of this
group list.
Answer: C
certification Microsoft certification 70-410 certification 70-410 certification 70-410
NO.7 You have a server named Server1 that runs Windows Server 2012.Server1 has the Hyper-V
server role
installed.Server1 is connected to two Fibre Channel SANs and is configured as shown in the
following
table.
You have a virtual machine named VM1.You need to configure VM1 to connect to SAN1.What
should you
do first?
A.Configure network adapter teaming.
B.Create a Virtual Fibre Channel SAN.
C.Create a Hyper-V virtual switch.
D.Add one HBA.
Answer: B
Microsoft 70-410 examen 70-410 examen certification 70-410 70-410 examen
NO.8 You have a server named Server1 that runs Windows Server 2012.You need to remove
Windows
Explorer, Windows Internet Explorer, and all related components and files from Server1.What
should you
run on Server1?
A.msiexec.exe /uninstall iexplore.exe /x
B.msiexec.exe /uninstall explorer.exe /x
C.Uninstall-WindowsFeature Server-Gui-Shell -Remove
D.Uninstall-WindowsFeature Server-Gui-Mgmt-Infra -Remove
Answer: C
Microsoft examen certification 70-410 70-410 70-410 70-410 examen 70-410 examen
NO.9 Note: This question is part of a series of questions that use the same or similar answer
choices.An
answer choice may be correct for more than one question in the series.Each question is
independent of
the other questions in this series.Information and details provided in a question apply only to that
question.Your network contains a server named Server1 that runs Windows Server 2012.Server1
has the
Hyper-V server role installed.Server1 hosts four virtual machines named VM1, VM2, VM3, and
VM4.Server1 is configured as shown in the following table.
You install a network monitoring application on VM2.You need to ensure that all of the traffic sent
to VM3
can be captured on VM2.What should you configure?
A.the startup order
B.Processor Compatibility
C.resource metering
D.Resource control
E.Port mirroring
F.Virtual Machine Chimney
G.Integration Services
H.Automatic Start Action
I.the VLAN ID
J.Single-root I/O virtualization
K.NUMA topology
Answer: E
Microsoft examen certification 70-410 certification 70-410
NO.10 Your network contains an Active Directory domain named adatum.com.The domain contains
three
domain controllers.The domain controllers are configured as shown in the following table.
DC3 loses network connectivity due to a hardware failure.You plan to remove DC3 from the
domain.You
log on to DC3.You need to identify which service location (SRV) records are registered by DC3.What
should you do?
A.Open the %windir%\system32\dns\backup\adatum.com.dns file.
B.Open the %windir%\system32\config\netlogon.dns file.
C.Run ipconfig /displaydns.
D.Run dcdiag /test:dns.
Answer: B
Microsoft certification 70-410 70-410 certification 70-410 70-410 examen certification 70-410
Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test Microsoft 70-410 soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test Microsoft 70-410 est le rêve pour les professionnels ambitieux.
没有评论:
发表评论