HP HP5-K03D, de formation et d'essai

Beaucoup de gens trouvent difficile à passer le test HP HP5-K03D, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test HP HP5-K03D n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test HP HP5-K03D. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification HP HP5-K03D, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test HP HP5-K03D à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.

Code d'Examen: HP5-K03D
Nom d'Examen: HP (Delta - Supporting and Servicing HP 3PAR StoreServ Solutions)
Questions et réponses: 30 Q&As

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test HP5-K03D est lequel très important dans les tests de Certification HP. Pour être qualifié de HP, on doit obtenir le passport de test HP HP5-K03D.

HP5-K03D Démo gratuit à télécharger: http://www.pass4test.fr/HP5-K03D.html

NO.1 Your customer has an existing HP 3PAR F400 array with two controller nodes and eight DC3
disk enclosures Each DC3 disk enclosure is fully populated with 300GB 15k disk drives.
The customer has purchased a new HP 3PAR StoreServ 7400 two-node system with five additional
drive enclosures to be installed in a second data center. This system is fully populated with 450GB
10k drives. Data will be migrated from the F400 to the 7400 by using Remote Copy Fibre Channel
(RCFC). The 7400 will then become the primary system, but data will continue to be replicated
between the systems. Additionally, the customer has ordered extra 8GB/S FC adapters for the new
7400.
What is the maximum number of configurable host ports on the new HP StoreServ 7400 array in the
customer environment?
A. 4
B. 8
C. 10
D. 12
Answer: D

HP   HP5-K03D examen   HP5-K03D
5. Your customer has an existing HP 3PAR F400 array with two controller nodes and eight DC3
disk enclosures. Each DC3 disk enclosure is fully populated with 300GB 15k disk drives.
The customer has purchased a new HP 3PAR StoreServ 7400 two-node system with five additional
drive enclosures to be installed in a second data center. This system is fully populated with 450GB
10k drives Data will be migrated from the F400 to the 7400 by using Remote Copy Fibre Channel
(RCFC). The 7400 will then become the primary system, but data will continue to be replicated
between the systems. Additionally, the customer has ordered extra 8GB/s FC adapters for the new
7400.
During the installation you record these serial numbers for the new HP 3PAR StoreServ system:
HP serial number CZ32439658
3PAR serial number 1628580
Which SPID is assigned during the installation?
A. SP0001628580
B. SP32439658
C. 1628580
D. 00032439658
Answer: A

certification HP   HP5-K03D examen   HP5-K03D examen   certification HP5-K03D
Reference:http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03603825 /c036038
2 5.pdf(page 7, second bullet)
6. Which statements are true about the HP 3PAR StoreServ 7000? (Select two.)
A. Within a column, there can be empty slots between drives.
B. Columns of drives must be of the same drive type and rotational speed for HDDs.
C. Drives must be added in identical pairs.
D. The LFF enclosure cannot be mixed with the SFF enclosure on the same node pair,
E. All columns have to contain the same number of drives.
Answer: B,C

HP examen   HP5-K03D   certification HP5-K03D   HP5-K03D   HP5-K03D examen
7. Your customer plans to build a two-tier architecture with one HP 3PAR StoreServ 7400. Layer 1
should be the SSD Tier, and Layer 2 should be the Fast Class Tier. After the SmartStart configuration
is complete, the customer connects to the system through the InformOS Management Console.
Which default CPGs are created during the process of initializing the storage system?
A. SSD RAID 1 and 5: Fast Class 1 and 6 default CPGs
B. SSD RAID 1 and 5: Fast Class 1 and 5 default CPGs
C. SSD RAID 1,5,and 6; Fast Class 1 and 6 default CPGs
D. SSD RAID 1 and 5 FastClass 1,5 and 6 default CPGs
Answer: A

HP   certification HP5-K03D   HP5-K03D examen   HP5-K03D examen   HP5-K03D

NO.2 What must be done prior to running HP 3PAR SmartStart?
A. The service laptop needs to be connected to the StoreServ system.
B. The Service Processor and StoreServ system must be connected to the same subnet
C. An installation service call must be placed with HP Central,
D. A zone must be created between the StoreServ system and the Service Processor.
Answer: B

HP examen   HP5-K03D examen   HP5-K03D   HP5-K03D

NO.3 A customer has an existing c70fJ0 enclosure, with 6 blades and FlexFabric modules. You have
been asked to install 5 additional blades for a virtualization project. The customer requires shared
storage for a Hyper-V cluster.
Their existing storage infrastructure is 1Gb iSCSI.
What would be the most cost-effective method for adding a new 3PAR storage?
A. Directly attach the FC Host ports of the c7000.
B. Install SAN Switch Modules in the c7000.
C. Install two Brocade 8 / 8 SAN Switches
D. Upgrade the network switches to 10GB
Answer: A

certification HP   HP5-K03D   HP5-K03D examen   HP5-K03D

NO.4 A customer has three HP 3PAR StoreServ 10000 systems in different sites on their
metropolitan campus The FC-based SANs within the different sites consist of B-series 8 Gbps
switches with an active port-based zoning. Between the sites, there is a 10 Gbps Ethernet
connection.
Which remote copy configuration should you recommend?
A. N-to-1 Configuration
B. Synchronous Long Distance Configuration
C. Unidirectional 1-to-1 Configuration
D. 1-to-N Configuration

Certification HP HP5-K03D est un des tests plus importants dans le système de Certification HP. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test HP HP5-K03D à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.