Dernières Juniper JN0-541 examen pratique questions et réponses

Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.

Le produit de Pass4Test peut assurer les candidats à réussir le test Juniper JN0-541 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

Choisissez le Pass4Test, choisissez le succès de test Juniper JN0-541. Bonne chance à vous.

Code d'Examen: JN0-541
Nom d'Examen: Juniper (IDP, Associate(JNCIA-IDP))
Questions et réponses: 230 Q&As

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Juniper JN0-541, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

On doit faire un bon choix pour passer le test Juniper JN0-541. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Juniper JN0-541 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Juniper JN0-541.

Si vous traviallez dur encore pour préparer le test de Juniper JN0-541 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Juniper JN0-541.

JN0-541 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-541.html

NO.1 Which three fields in a packet must match an IDP rule before that packet is examined for an attack?
(Choose three.)
A. terminate match
B. service
C. destination address
D. source address
E. attack object
Answer: B,C,D

Juniper   JN0-541 examen   JN0-541 examen

NO.2 After you enable alerts for new hosts that are detected by the Enterprise Security Profiler, where do you
look in Security Manager to see those alerts?
A. Security Monitor > Profiler > Application Profiler tab
B. Security Monitor > Profiler > Violation Viewer tab
C. Security Monitor > Profiler > Network Profiler tab
D. Log Viewer > Profiler Log
Answer: D

certification Juniper   JN0-541 examen   JN0-541 examen

NO.3 Which statement is true regarding IDP rule matching on a sensor?
A. Each rule in the IDP rule base that matches on the source IP, destination IP, and service will be
processed further.
B. Each rule in the IDP rule base that matches on the source IP, destination IP, and service will be
processed further, unless the particular rule is terminal.
C. Each rule in the IDP rule base that matches on the source IP, destination IP, service, and attack object
will be processed further.
D. Each rule in the IDP rule base that matches on the source IP, destination IP, service, and attack object
will be processed further, unless the particular rule is terminal.
Answer: B

Juniper   JN0-541   certification JN0-541

NO.4 What is "a deviation from a protocol's expected behavior or packet format"?
A. context
B. compound attack object
C. attack signature
D. protocol anomaly
Answer: D

Juniper   certification JN0-541   JN0-541   JN0-541 examen

NO.5 Which statement about the Enterprise Security Profiler (ESP) is true?
A. The ESP must be configured and started using the IDP sensor CLI before it is used.
B. The administrator must manually initiate Security Manager to sensor polling to retrieve ESP data.
C. The ESP must be configured and started on each IDP sensor manually, using the Security Manager
GUI.
D. The ESP is started by default in IDP version 4.0 or newer.
Answer: C

Juniper   JN0-541   JN0-541 examen

NO.6 Which two will change the management IP of an IDP sensor? (Choose two.)
A. Edit the existing IDP sensor object in Security Manager GUI and change the IP address.
B. Delete the IDP sensor object from Security Manager and re-add the sensor with the new IP address.
C. Useifconfig to change the management IP address.
D. Use the ACM to change the management IP address.
Answer: B,D

Juniper examen   certification JN0-541   JN0-541   certification JN0-541

NO.7 Which rule base would detect the use of nmap on a network?
A. SYN protector
B. traffic anomalies
C. backdoor
D. exempt
Answer: B

Juniper examen   JN0-541   JN0-541 examen   certification JN0-541   JN0-541

NO.8 A newly re-imaged sensor is running IDP 4.0 code. You want to assign IP address
10.1.1.1 to the sensor. Which method do you use to do this?
A. Connect to the sensor's console port, login as root, and answer theEasyConfig
B. Use SSH to connect to the sensor at IP 192.168.1.1.Login as root, and run ipconfig.
C. Connect to the sensor's console port, login as admin, and answer theEasyConfig
D. Use SSH to connect to the sensor at IP 192.168.1.1.Login as admin, and run ipconfig.
Answer: A

Juniper   JN0-541   JN0-541   JN0-541

NO.9 Exhibit:
You work as an administrator at Certkiller .com. Study the exhibit carefully. In the exhibit, which SYN
protector mode is the IDP using?
A. passive
B. handshake
C. relay
D. protective
Answer: A

certification Juniper   JN0-541   JN0-541   JN0-541

NO.10 You update your attack object database on Security Manager. What must you do before the new attack
objects become active on the IDP sensors?
A. You install the updated security policy on the IDP sensor.
B. No changes are required.
C. You must restart the IDP sensor.
D. You must restart the IDP processes on the IDP sensors.
Answer: A

Juniper examen   JN0-541 examen   JN0-541   JN0-541   JN0-541

NO.11 Which command on the IDP sensor CLI can be used to display the sensor statistics, which policy is
installed, and mode of sensor deployment?
A. sctop "s" option
B. sensor statistics can only be displayed from Security Manager GUI
C. scio list s0 sensor stat
D. scio sensor stat
Answer: A

Juniper   JN0-541   certification JN0-541   certification JN0-541   JN0-541

NO.12 Which statement is true about the attack object database update process?
A. Each sensor updates its own attack object database automatically; however they must be able to
access the Juniper site on TCP port 443.
B. The attack object database update must be manually performed by the administrator, and the
administrator must manually install it on each sensor.
C. The attack object database update can be initiated manually or automatically.
D. The attack object database update can be automatically scheduled to occur using the Security
Manager GUI.
Answer: C

certification Juniper   JN0-541   certification JN0-541   JN0-541   certification JN0-541

NO.13 Which rule base would detect netcat?
A. SYN protector
B. traffic anomalies
C. backdoor
D. exempt
Answer: C

Juniper examen   certification JN0-541   JN0-541   JN0-541

NO.14 Which type of cable do you use for a console connection to an IDP sensor?
A. CAT 5 cable
B. Juniper proprietary cable
C. straight-through serial cable
D. null-modem cable
Answer: D

Juniper examen   JN0-541   JN0-541   JN0-541   certification JN0-541

NO.15 When connecting to a sensor using SSH, which account do you use to login?
A. admin
B. super
C. netscreen
D. root
Answer: A

certification Juniper   JN0-541   JN0-541 examen   JN0-541

NO.16 Which OSI layer(s) of a packet does the IDP sensor examine?
A. layers 2-7
B. layers 2-4
C. layer 7 only
D. layers 4-7
Answer: A

certification Juniper   certification JN0-541   certification JN0-541   certification JN0-541   JN0-541

NO.17 Which statement is true about packet capture in the IDP sensor?
A. The Log Viewer has no indication of whether a log message has associated packet captures.
B. You can only log packets after an attack packet.
C. You can configure a particular number of packets to capture before and after an attack.
D. Packet capture records all packets flowing through the sensor.
Answer: C

Juniper examen   JN0-541 examen   JN0-541

NO.18 On a sensor, which command will indicate if log messages are being sent to Security Manager.?
A. scio vr list
B. serviceidp status
C. scio agentstats display
D. scio getsystem
Answer: C

Juniper   certification JN0-541   certification JN0-541   JN0-541 examen

NO.19 Which TCP port is used for communication between Security Manager and an IDP sensor?
A. 7801
B. 7800
C. 7803
D. 443
Answer: C

certification Juniper   JN0-541   JN0-541   certification JN0-541

NO.20 What is one use of an IP action?
A. It blocks subsequent connections from specific IP addresses.
B. It modifies the IP header to redirect the attack.
C. It modifies the IP header to prevent the attack.
D. It permits or denies the traffic, based on the IP header.
Answer: A

Juniper   JN0-541 examen   JN0-541

Les produits de Pass4Test sont préparés pour le test Certification Juniper JN0-541, y compris les formations et les informations ciblées au test Juniper JN0-541. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.