Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test HP HP0-500, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.
Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.
Code d'Examen: HP0-500
Nom d'Examen: HP (HP ProLiant Server Maintenance)
Questions et réponses: 200 Q&As
Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.
Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.
Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification HP HP0-500. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test HP HP0-500. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.
HP0-500 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-500.html
NO.1 .What is the advantage of having an online spare as part of a SMART array configuration?
A. The drive can be used for temporary data storage until another drive fails.
B. The array will not lose its fault tolerance in case of a single drive failure.
C. You always have a spare drive available to physically put in place of a failed drive without having to
order a spare drive.
D. You can load balance across the array.
Answer: B
HP certification HP0-500 HP0-500 examen HP0-500 examen HP0-500
NO.2 .What is the likely cause of rack instability?
A. more than one component simultaneously extended
B. UPS installed at the bottom of the rack
C. side panels not installed
D. missing blanking panels
Answer: A
HP HP0-500 examen HP0-500 HP0-500 examen certification HP0-500 HP0-500 examen
NO.3 .What do Compaq hot-pluggable power supplies have that traditional power supplies do not?
A. higher current
B. higher voltage
C. microcontroller Self-Test
D. power Monitor Port
Answer: C
HP HP0-500 examen HP0-500 HP0-500 HP0-500 examen
NO.4 .Which diagnostic mode tests individual components of a server?
A. Intermediate
B. Automatic
C. QuickCheck
D. Prompted
Answer: D
HP examen HP0-500 HP0-500 HP0-500 HP0-500 HP0-500
NO.5 .What capability do fans have in some hot-pluggable power supplies?
A. variable RPM, depending on thermal sensor readings
B. hot plug fan replacement
C. dual-power inputs for redundancy
D. redundant power supply fans
Answer: A
certification HP certification HP0-500 HP0-500 HP0-500 HP0-500
NO.6 .What is used to disable a Compaq server serial port?
A. Compaq Insight Manager
B. System Board Switch
C. System Configuration Utility
D. Nothing, as it is disabled by default
Answer: C
HP HP0-500 examen HP0-500 HP0-500 examen
NO.7 .Which resources could be used to help isolate correctable memory errors?
A. SSD and DAAD
B. ACU and SmartStart
C. Server Health Logs and Integrated Management Log
D. QRG (Quick Reference Guide) and Inspect
Answer: C
certification HP certification HP0-500 HP0-500 examen HP0-500 examen
NO.8 .On a ProLiant 450 MHz processor server, Level 2 cache is logging errors. Which item should be
replaced?
A. Cache Memory Stick
B. System I/O Board
C. CPU/Processor Module
D. Riser Card
Answer: C
HP certification HP0-500 certification HP0-500 certification HP0-500
NO.9 .Where should the server Feature Board be installed in Compaq servers?
A. A designated slot
B. Any PCI 64-bit slot
C. Any extended slot
D. An EISA slot
Answer: A
HP HP0-500 examen HP0-500 examen
NO.10 .Which Compaq server component is covered under prefailure warranty?
A. DIMM memory
A. hard disk controller
B. recovery server option
C. network interface controller
Answer: A
HP HP0-500 certification HP0-500 certification HP0-500 HP0-500 examen
NO.11 .Which step must be performed when upgrading a customer's ProLiant server from a Pentium II Xeon
to Pentium III Xeon processor?
A. Flash ROM before replacing processors.
B. Ensure all processors have the same frequency and cache size.
C. Mix cache sizes in pairs for sockets 1 and 3.
D. Upgrade terminator boards for all four sockets.
Answer: A
certification HP HP0-500 certification HP0-500
NO.12 .After a field engineer adds a second array controller to the server, the operating system does not boot .
What is the likely cause of the problem?
A. incorrect jumper settings
B. incorrect slot order
C. array controller boot order D. interrupt conflicts
Answer: C
certification HP HP0-500 certification HP0-500 certification HP0-500
NO.13 .What enables remote server management and control regardless of the operating system or condition
of the server?
A. CIM (Compaq Insight Manager)
B. SCU (System Configuration Utility)
C. Remote Utilities (from system Diagnostics menu)
D. RILOE (Remote Insight Light Out Edition option)
Answer: D
certification HP HP0-500 certification HP0-500 certification HP0-500
NO.14 .Which Compaq utility is used to configure Online Spare memory?
A. Rapid Raid Utility
B. Raid Builder for AMP
C. ROM-based Setup Utility
D. SmartStart
Answer: C
HP certification HP0-500 HP0-500 examen HP0-500 HP0-500
NO.15 .Which network interface controller configuration can support redundant NICs?
A. one dual-port fast Ethernet network controller
B. one 16/4 token ring network controller connected to a managed hub
C. one fast Ethernet network controller connected to a second server
D. one fast Ethernet network controller connected to a router
Answer: A
HP HP0-500 HP0-500 certification HP0-500 HP0-500
NO.16 .While running Diagnostics on your ProLiant server, you receive an error code: 6092. What should you
do?
A. Replace network card.
B. Replace disk controller.
C. Connect external loopback cable.
D. Place network card in a different slot.
Answer: C
certification HP HP0-500 certification HP0-500 certification HP0-500 HP0-500 examen
NO.17 .Which utility is assists in planning and configuring Compaq racks?
A. RackManager
B. RackAssistant
C. RackIntegrator
D. RackBuilder Pro
Answer: D
HP examen HP0-500 HP0-500 examen
NO.18 Which component failure will cause a Compaq server to reset but not power up?
A. IMD
B. PPM
C. DIMM
D. CPU
Answer: B
HP HP0-500 certification HP0-500 HP0-500 HP0-500
NO.19 .What problem is indicated if the server powers up with no video and an audible POST error?
A. memory module not seated
B. monitor signal cable not connected
C. intermittent memory parity errors
D. monitor in power saver mode
Answer: A
certification HP HP0-500 HP0-500 examen HP0-500 examen
NO.20 .What is the first required action to safely remove an adapter from a Compaq PCI hot-pluggable slot?
A. Just remove the card.
B. Power down the slot to remove the card.
C. Power down the server to remove the card.
D. Install the new card in another slot.
Answer: B
certification HP HP0-500 examen HP0-500 examen certification HP0-500 HP0-500
NO.21 .What is the available array space after grouping six 4GB hard drives using Advanced Data Guarding?
A. 12GB
B. 16GB
C. 20GB
D. 24GB
Answer: B
certification HP HP0-500 HP0-500 examen
NO.22 .How is a redundant Xeon server PPM identified?
A. one processor installed
B. two processors installed
C. fully populated PPM circuit board
D. half populated PPM circuit board
Answer: C
HP HP0-500 examen certification HP0-500 HP0-500 HP0-500
NO.23 .What are the best sources for the latest versions of Rompaqs and Softpaqs? Select two.
A. Compaq ResourcePaq
B. SmartStart
C. HP/Compaq website
D. QuickFind2000
E. OS ServicePaq
Answer: B,C
HP HP0-500 certification HP0-500
NO.24 .Which product reports prefailure on all Compaq SMART hard drives?
A. CIM
B. RBSU C. ACU D. SCU
Answer: A
HP HP0-500 examen HP0-500 HP0-500 examen HP0-500
NO.25 .Which action is required to safely replace non hot-pluggable components in servers with redundant
hot-pluggable power supplies?
A. Depress server On/Off switch from front panel.
B. Ensure DC LED indicator on the hot-pluggable power supply is inactive.
C. Remove AC power cord from the primary hot-pluggable power supply.
D. Remove AC power cords from all hot-pluggable power supplies.
Answer: D
certification HP HP0-500 certification HP0-500 certification HP0-500 HP0-500 examen HP0-500
NO.26 .A defective processor is replaced in a Compaq server. The 212 "System Processor Failed" POST
error will not go away. What action can be performed?
A. Erase NVRAM to clear the Health Log.
B. Run Diagnostics on memory.
C. Replace hot-pluggable power supply.
D. Replace Memory Expansion Board.
Answer: A
HP examen certification HP0-500 HP0-500 certification HP0-500
NO.27 .When servicing a customer's system, what is the proper sequence to remove power to the server and
any external storage subsystems?
A. external storage systems first, then server
B. server first, then the external storage systems
C. UPS, then the server
D. external storage first, then the UPS
Answer: B
certification HP HP0-500 certification HP0-500 HP0-500 HP0-500
NO.28 .A hard drive fails on a system with an on-line spare. When is it recommended that the failed drive be
replaced?
A. upon discovery of the failure
B. upon completion of rebuild of on-line spare
C. not needed, failed drive will perform self-repair
D. any time before rebuild of online spare is complete
Answer: B
HP HP0-500 HP0-500 HP0-500 examen
NO.29 .What can Compaq Diagnostics reliably test?
A. Compaq Insight Manager (CIM) agents
B. system ROM BIOS compatibility
C. DAT tape drive read/write function
D. non-Compaq SCSI controller
Answer: C
HP HP0-500 examen HP0-500 examen HP0-500 certification HP0-500 certification HP0-500
NO.30 .What action is recommended if the Server Health Driver consistently reports a correctable memory
error in the same location?
A. Run ERASE utility to clear the location.
B. Schedule downtime and replace memory.
C. This is normal and can be ignored.
D. Mark "repaired" in Insight Manager.
Answer: B
HP HP0-500 HP0-500 examen HP0-500 HP0-500 certification HP0-500
Pass4Test est un seul site web qui peut offrir toutes les documentations de test HP HP0-500. Ce ne sera pas un problème à réussir le test HP HP0-500 si vous préparez le test avec notre guide d'étude.
没有评论:
发表评论