Le test Certificat HP HP0-S13 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification HP HP0-S13. Vous allez prendre toutes essences du test HP HP0-S13 dans une courte terme.
Vous avez aussi la possibilité à réussir le test HP HP0-S13. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.
Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.
Le test HP HP0-S13 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test HP HP0-S13. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.
Code d'Examen: HP0-S13
Nom d'Examen: HP ( HP BladeSystem Class Solutions I)
Questions et réponses: 151 Q&As
Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification HP HP0-S13. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de HP0-S13, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.
HP0-S13 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-S13.html
NO.1 Which types of drives are supported by the HP BladeSystem c-Class storage blades? (Select two.)
A. SCSI
B. Serial ATA (SATA)
C. Parallel ATA (PATA)
D. Serial Attached SCSI (SAS)
E. Fibre Attached Technology Adapted (FATA)
Answer: BD
certification HP HP0-S13 HP0-S13
NO.2 To utilize all four Ethernet ports on the NC325m PCIe Quad-Port 1Gb Server Adapter, which
mezzanine position must you avoid?
A. mezzanine position 1 in full-height server blades
B. mezzanine position 2 in full-height server blades
C. mezzanine position 3 in full-height server blades
D. mezzanine position 1 in half-height server blades
E. mezzanine position 2 in half-height server blades
Answer: D
HP HP0-S13 certification HP0-S13 HP0-S13
NO.3 Which statements are true regarding the HP StorageWorks Ultrium 448c Tape Blade? (Select three.)
A. The tape blade provides direct-attach data protection for the adjacent server blade.
B. The tape blade provides network backup protection for all data within the enclosure.
C. The tape blade installs in a full-height device bay of either the c3000 or c7000 enclosure.
D. The tape blade installs in a half-height device bay of either the c3000 or c7000 enclosure.
E. The tape blade and the SB40c storage blade can both partner with the same full-height server blade.
F. The tape blade can partner with any of the HP BladeSystem c-Class ProLiant or Integrity server blades.
Answer: ABD
HP HP0-S13 HP0-S13 certification HP0-S13 HP0-S13 examen
NO.4 From which sources can you configure individual iLO management processors? (Select three.)
A. from an FTP server
B. through a scripted setup
C. from the HP Management CDROM
D. through virtual Keyboard/Video/Monitor (KVM)
E. remotely through a browser-based Web interface
F. locally using the ROM-Based Setup Utility (RBSU)
Answer: BEF
HP HP0-S13 HP0-S13 HP0-S13 examen HP0-S13 examen certification HP0-S13
NO.5 Click the Exhibit button.
In a four-fan configuration, where must these fans be installed?
A. bays 1, 2, 3, and 4
B. bays 1, 2, 3, and 5
C. bays 2, 4, 5, and 6
D. bays 3, 4, 5, and 6
Answer: C
HP HP0-S13 certification HP0-S13
NO.6 Which HP software is included with Insight Control Data Center Edition (ICDCE) and can be installed
as an option in the ICDCE installation but must be licensed separately? (Select two.)
A. Server Migration Pack (SMP)
B. Remote Support Pack (RSP)
C. Virtual Machine Management (VMM) Pack
D. Vulnerability and Patch Management (VPM) Pack
Answer: AC
HP examen certification HP0-S13 certification HP0-S13 certification HP0-S13 HP0-S13 examen HP0-S13
NO.7 You are configuring the MSA1000 storage solution to boot from a SAN. Although there are several
physical drives reported in the ACU graphical user interface, the Selective Storage Presentation (SSP)
link is missing. Why?
A. The ACU has detected multiple paths from the host.
B. The MSA1000 does not have any logical drives defined.
C. An incorrect MSA1000 device driver is loaded in the host server.
D. The host server is not running the HP Insight Agents, or these agents are outdated.
Answer: B
HP examen HP0-S13 HP0-S13 HP0-S13 examen
NO.8 Which statements describe the function of the Onboard Administrator? (Select two.)
A. It enables automated provisioning of the HP BladeSystem c-Class server blades.
B. It provides I2C and ICMB management interfaces to all HP BladeSystem c-Class components.
C. It consolidates 16 iLO 2 ports in the c7000 enclosure and 8 iLO 2 ports in the c3000 enclosure.
D. It creates a LAN-based or SAN-based abstraction layer between the server blades and the external
LAN/SAN.
Answer: BC
HP HP0-S13 examen HP0-S13 examen HP0-S13 examen
NO.9 How can the Onboard Administrator show a health status different from the status displayed by HP
Systems Insight Manager (HP SIM)? (Select two.)
A. The passive Onboard Administrator might have been activated through the user interface without
notifying HP SIM.
B. The active Onboard Administrator status does not include information from the agents running on the
server blades.
C. The active Onboard Administrator might indicate a failure that HP SIM displays in the event log rather
than in the health status.
D. The passive Onboard Administrator does not send a trap to HP SIM indicating a change of state when
it activates after a failure.
E. Because of an Integrated Lights-Out (iLO) configuration error, iLO might have indicated different health
states to the Onboard Administrator and to HP SIM.
Answer: BC
certification HP HP0-S13 examen HP0-S13 examen certification HP0-S13
NO.10 Which functions does the Onboard Administrator perform in the BladeSystem c-Class? (Select two.)
A. It manages connections to the interconnect modules.
B. It activates Remote Deployment Pack (RDP) when an in-service server fails.
C. It automates the process of deploying server operating systems and software.
D. It drives all management features through the Inter-Integrated Circuit (I2C) and Intelligent Chassis
Management Bus (ICMB) interfaces.
Answer: AD
HP HP0-S13 HP0-S13 HP0-S13 HP0-S13
NO.11 Ten fans are installed in a fully populated c7000 enclosure and are configured as AC Redundant. All
server blades are powered on. What happens if one fan fails? (Select three.)
A. The fan subsystem health status remains OK.
B. The health LED of the failed fan illuminates red.
C. The health LED of the failed fan illuminates solid amber.
D. The fan subsystem health status changes to FAILED.
E. The fan subsystem health status changes to DEGRADED.
F. The Onboard Administrator increases the fan RPM to maximum.
G. The Onboard Administrator begins to shut down the least active server blades.
Answer: CEF
certification HP HP0-S13 examen HP0-S13 HP0-S13 HP0-S13 examen HP0-S13 examen
NO.12 Which statements are true when using the HP StorageWorks SB40c storage blade for c-Class?
(Select three.)
A. Each SB40c storage blade can partner with only one server blade.
B. A c7000 enclosure can have a maximum of eight SB40c storage blades.
C. The SB40c storage blade supports Serial Attached SCSI (SAS) drives only.
D. A full-height storage blade can connect to a maximum of two SB40c storage blades.
E. Each SB40c storage blade requires an HP PCI Express Mezzanine Pass-Thru card to be installed in
mezzanine slot 3 of the full-height storage blade.
F. If connecting both the SB40c storage blade and the Ultrium 448c tape blade to the same full-height
server blade, the SB40c storage blade must be installed in the top bay.
Answer: ABE
HP examen HP0-S13 HP0-S13
NO.13 Which role-based Virtual Connect Manager access enables you to create, edit, and delete Virtual
Connect profiles?
A. Server
B. Admin
C. Storage
D. Domain
E. Networking
Answer: A
HP certification HP0-S13 HP0-S13 examen HP0-S13 HP0-S13 examen
NO.14 Which statement correctly describes Insight Control Data Center Edition (ICDCE)?
A. all-in-one Linux-hosted blade management and deployment software package
B. integrated suite of software that simplifies the provisioning, management, and recovery of
BladeSystem infrastructures
C. HP SIM 5.1 plug-in that adds remote monitoring and warranty, HP Care Pack, and contract entitlement
features to HP SIM
D. server deployment solution that facilitates the installation, configuration, and deployment of
high-volumes of servers through either a GUI-based or a Web-based console, using either scripting or
imaging technology
Answer: B
certification HP HP0-S13 HP0-S13
NO.15 Which HP BladeSystem c-Class components are covered by the HP 3-year parts, 3-year labor, and
3-year on-site limited global warranty? (Select three.)
A. server blades
B. c7000 enclosures
C. c3000 enclosures
D. SAS and SATA disk drives
E. Ethernet and SAN interconnect switches
F. Ethernet and Fibre Channel Pass-Thru modules
Answer: ABC
certification HP HP0-S13 examen HP0-S13 examen certification HP0-S13 HP0-S13 examen
NO.16 Which statements correctly describe the integrated management functionality of HP SIM and HP
BladeSystem c-Class environments? (Select three.)
A. The redundant Onboard Administrator module cannot automatically take over control of the enclosure
until the primary Onboard Administrator module fails.
B. For added security, you must specify your user name and password when accessing the server blade
iLOs from the Onboard Administrator GUI.
C. The Onboard Administrator includes status information from the server blade agents and therefore
displays the same server blade status in its GUI as HP SIM.
D. HP SIM reports the Onboard Administrator modules, server blades, and server blade iLOs separately
because each has its own IP address and its own instrumentation.
E. Both the primary and redundant Onboard Administrator modules share the same IP address, thereby
enabling transparent failover for HP SIM and other management clients.
F. You can change which Onboard Administrator module is active and which is standby by logging in to
the standby Onboard Administrator module user interface and changing its setting.
Answer: ADF
HP HP0-S13 HP0-S13 examen HP0-S13 HP0-S13 certification HP0-S13
NO.17 Which statements describe how the Integrated Lights-Out (iLO) management processor receives its
power in the HP BladeSystem c-Class enclosure? (Select two.)
A. iLO receives its power through a connection to the server.
B. iLO receives its power through an independent connection.
C. iLO can be activated through Virtual Power from a remote server.
D. iLO receives redundant power in the event of a power supply failure.
E. iLO can be activated even if the server is not connected to a power source.
Answer: BD
HP HP0-S13 HP0-S13 HP0-S13
NO.18 How will the HP BladeSystem c-Class enclosures indicate if a server blade is not installed in the correct
device bay?
A. The HP BladeSystem Insight Display will flash blue.
B. The interconnect will display errors when you configure it.
C. The Onboard Administrator will not allow the enclosure to power on.
D. The Onboard Administrator will not allow the interconnects to power on.
E. The Onboard Administrator will not allow the incorrectly placed server blade to power on.
Answer: E
certification HP HP0-S13 certification HP0-S13 HP0-S13 examen HP0-S13 examen
NO.19 What are the features of the HP Customer Self-Repair program? (Select three.)
A. HP ships the replacement part directly to the customer.
B. The customer is responsible for replacing the faulty part.
C. HP ships the replacement part to an authorized partner closest to the customer.
D. The customer diagnoses the issue and determines whether a replacement part is required.
E. The program is available for HP products that are under warranty but not covered by a service
contract.
F. An HP support specialist diagnoses the problem and determines whether a replacement part is
necessary.
Answer: ABF
HP HP0-S13 examen HP0-S13 HP0-S13
NO.20 Which statements are true regarding the BladeSystem? (Select two.)
A. BladeSystem c-Class and p-Class server blades will not ship until 2009.
B. The c-Class interconnects are compatible with the p-Class interconnects at a management interface
level.
C. c-Class server blades can be installed in a p-Class enclosure with an enclosure upgrade kit.
D. p-Class and c-Class server blades are compatible with industry-standard Web Based Enterprise
Management (WBEM).
E. The Onboard Administrator can manage both p-Class and c-Class enclosures.
Answer: BD
certification HP HP0-S13 examen HP0-S13
Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test HP HP0-S13. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.
没有评论:
发表评论