Choisir le Pass4Test peut vous aider à réussir 100% le test HP HP0-Y35 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
Pass4Test peut offrir nombreux de documentations aux candidats de test HP HP0-Y35, et aider les candidats à réussir le test. Les marétiaux visés au test HP HP0-Y35 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test HP HP0-Y35 100%.
Code d'Examen: HP0-Y35
Nom d'Examen: HP (Wireless Networks - ASE 2011 Delta Exam)
Questions et réponses: 75 Q&As
Le test HP HP0-Y35 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test HP HP0-Y35 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.
Pass4Test peut offrir la facilité aux candidats qui préparent le test HP HP0-Y35. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A HP HP0-Y35 selon le résumé de test réel HP HP0-Y35. Vous pouvez réussir le test à la première fois sans aucune doute.
Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test HP HP0-Y35 à la première fois.
Passer le test HP HP0-Y35, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification HP HP0-Y35. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification HP HP0-Y35.
HP0-Y35 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y35.html
NO.1 In an IRF stack, which operational plane is centralized (in the Master) and which is distributed
(among all members)?
A. Management: centralized
Control: centralized
Forwarding: centralized
B. Management: distributed
Control: distributed
Forwarding: distributed
C. Management: centralized
Control: distributed
Forwarding: distributed
D. Management: distributed
Control: centralized
Forwarding: distributed
E. Management: centralized
Control: centralized
Forwarding: distributed
Answer: E
HP HP0-Y35 examen HP0-Y35 examen HP0-Y35
NO.2 Using HP A5800 switches, which element must be configured in all switches involved in Layer 2
remote port mirroring?
A. remote-mirroring group
B. mirroring-ingress port
C. monitor-egress port
D. remote-probe VLAN
Answer: D
HP HP0-Y35 examen HP0-Y35
NO.3 You have been asked to deploy a guest wireless service within an A-Series solution in the
reception area of a marketing firm. The clients associated with the guest service should be
assigned to VLAN 10. In which view do you assign the VLAN to the wireless service?
A. System view
B. Service Template view
C. VLAN Interface view
D. ESS Interface view
Answer: D
HP HP0-Y35 HP0-Y35 HP0-Y35
NO.4 Click the Exhibit button.
You have been asked to configure the switching engine of an HP A3000-24G PoE+ Wireless
Switch. First, you log in to the CLI of the access controller and then move to the System view. You
then attempt to issue the partial command oap co and use the Tab key to complete it. However,
the CLI does not complete the command but issues a line return instead, as shown in the exhibit.
What must you do to connect to the CLI of the switching engine?
A. Return to the User view and then issue the command.
B. Enter the OAP view and then issue the command.
C. Use the CTRL+K key combination to access the CLI of the switching engine.
D. Telnet directly to the IPaddress of the switching engine and issue the command.
Answer: A
HP examen certification HP0-Y35 HP0-Y35 examen HP0-Y35 HP0-Y35 examen
NO.5 Which sampling mechanisms are available in sFlow in A-Series switches and routers? (Select
two.)
A. packet-based
B. packet-length-based
C. time-based
D. ip-protocol-based
E. ip-source-address-based
F. mac-address-based
Answer: A,C
HP examen HP0-Y35 HP0-Y35 examen HP0-Y35 HP0-Y35 examen HP0-Y35 examen
NO.6 After a MAD enabled IRF-stack splits, what happens to the part of the stack that entered Recovery
state?
A. All ports, except for the IRF-ports, BFD enabled ports, and console ports are shut down.
B. All ports, except for the IRF-ports, LACP enabled Link aggregation groups, console ports, and
manually excluded ports are shut down.
C. All ports, except for the IRF-ports, console ports, and manually excluded ports, are shut down.
D. All ports except for manually excluded ports are shut down.
Answer: C
HP certification HP0-Y35 certification HP0-Y35 certification HP0-Y35
NO.7 Which roles are supported by the sFlow standard?
A. agent and collector only
B. probe and collector only
C. agent, collector, and analyzer
D. probe, collector, and analyzer
Answer: A
certification HP HP0-Y35 HP0-Y35 HP0-Y35
NO.8 Click the Exhibit button.
An IRF-stack is being built using HP A5800 switches, and IRF member 1 will be connected to IRF
member 2 using IRF-port 2. Which IRF-port should it be connected to?
A. 1
B. 2
C. 3
D. any
Answer: A
HP HP0-Y35 certification HP0-Y35 certification HP0-Y35
NO.9 What are acceptable topologies for an IRF-Stack? (Select two.)
A. star
B. tree
C. daisy-chain
D. mesh
E. ring
Answer: C,E
certification HP certification HP0-Y35 certification HP0-Y35 HP0-Y35 examen
NO.10 Click the Exhibit button.
When IRF with Distributed Link Aggregation is implemented at all layers of a LAN (Core,
Aggregation, and Access), which protocols can be replaced by IRF functions? (Select two.)
A. MSTP
B. LACP
C. BFD
D. NSF/GR
E. VRRP
Answer: A,E
HP HP0-Y35 HP0-Y35 examen HP0-Y35 examen
NO.11 Which protocols/technologies can be used to implement IRF MAD? (Select two.)
A. NSF/GR
B. ICMP
C. IGMP
D. BFD
E. LACP
Answer: D,E
HP examen HP0-Y35 certification HP0-Y35
NO.12 Click the Exhibit button.
You have recently upgraded the Comware of an HP A-Series Access Controller (AC). Prior to
rebooting the device, you issued the dir command to display the contents of the flash root
directory. Upon reboot, the AC does not successfully run the new version of firmware. What is the issue?
A. The device does not have enough memory to run the new firmware.
B. The filename of the firmware is incorrect.
C. The new firmware is not present in the root directory.
D. Thebootware of the device requires updating as well.
Answer: B
HP HP0-Y35 examen HP0-Y35 HP0-Y35
NO.13 Click the Exhibit button.
A network administrator is managing an HP A-Series Wireless Access Controller at the command
line interface (CLI). The administrator issues a command to view the contents of the controller
flash directory. Looking at the output, which access point models can the controller boot and
command to view the contents of the controller? flash directory. Looking at the output, which
access point models can the controller boot and manage? (Select two.)
A. HP WA2220-AG
B. HP WA2612-AGN
C. HP WA2620-AGN
D. HP WA2610E-AGN
E. HP WA2620E-AGN
Answer: B,C
HP HP0-Y35 HP0-Y35 HP0-Y35 examen
NO.14 Given an HP A5800 switch that is in its factory default configuration, what happens after the
following command sequence? (Note: There is no save command.) system-view irf member 1
renumber 2 quit reboot
A. The IRF member ID will be 1.
B. The IRF member ID will be 2.
C. The IRF member ID will be assigned dynamically.
D. The IRF member ID will be "unknown."
Answer: B
HP examen certification HP0-Y35 HP0-Y35 examen HP0-Y35
NO.15 You have been asked to deploy an additional HP A-Series wireless access point in the conference room
of an advertising agency. You connect to the CLI of the access controller and create an AP management
template. In which view do you specify the serial number of the access point?
A. Radio view
B. Service Template view
C. AP view
D. ESS Interface view
Answer: C
certification HP HP0-Y35 examen HP0-Y35
Votre vie changera beaucoup après d'obtenir le Certificat de HP HP0-Y35. Tout va améliorer, la vie, le boulot, etc. Après tout, HP HP0-Y35 est un test très important dans la série de test Certification HP. Mais c'est pas facile à réussir le test HP HP0-Y35.
没有评论:
发表评论