Le test Symantec ST0-237 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.
Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Symantec ST0-237 très tôt. Pass4Test peut vous permettre à réussir 100% le test Symantec ST0-237, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
Code d'Examen: ST0-237
Nom d'Examen: Symantec (Symantec Data Loss Prevention 12 Technical Assessment)
Questions et réponses: 300 Q&As
Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Symantec ST0-237 est bien autorisé. Avec le certificat Symantec ST0-237, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Symantec ST0-237.
Vous avez aussi la possibilité à réussir le test Symantec ST0-237. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.
Est-ce que vous vous souciez encore pour passer le test Symantec ST0-237? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Symantec ST0-237, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Symantec ST0-237. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.
ST0-237 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-237.html
NO.1 Which two locations can the administrator verify a newly created policy was loaded on a
detection server? (Select two.)
A. System > Servers > Overview
B. System > Servers > Server Detail
C. Manage > Policies > Policy List
D. System > Servers > Overview > Configure Server
E. System > Servers > Events
Answer: B,E
Symantec examen ST0-237 ST0-237 examen certification ST0-237
NO.2 What is the minimum percentage of spare disks in a disk group?
A. 10%
B. 15%
C. 20%
D. 25%
Answer: A
Symantec ST0-237 ST0-237 examen ST0-237
NO.3 An incident responder is viewing a discover incident snapshot and needs to determine which
information to provide to the next level responder.Which information would be most useful in
assisting the next level responder with data clean-up?
A. Incident Details: Message Body content
B. Custom Attributes: Most Active User from Data Insight
C. Incident Details: File Owner metadata
D. Access Information: File Permissions
Answer: B
certification Symantec ST0-237 certification ST0-237 ST0-237
NO.4 A system administrator has a large amount of data that is not being accessed on the
company's storage devices. This excess amount of data is causing slow access to the active data. You
want to set up automatic relocation of data so that data expires as per its defined age.
What should you do?
A. Use the Data Movement Service (DMS) to set the threshold for automatic relocation of data.
B. Use the Quality of Storage Service (QoSS) to set the threshold for automatic relocation of data.
C. Use the Virtual Data Aging Service (VDAS) to set the threshold automatic relocation of data.
D. Use the Intelligent Volume Service (IVS) to set the threshold for automatic relocation of data.
Answer: B
Symantec certification ST0-237 ST0-237 ST0-237
NO.5 An information security officer has detected an unauthorized tool on desktops being used to
transmit data with encrypted communications.
Which Symantec Data Loss Prevention feature should the information security officer use to prevent
this tool from accessing confidential data?
A. removable storage monitoring
B. network protocol monitoring
C. application path filtering
D. application monitoring
Answer: D
certification Symantec ST0-237 examen ST0-237
NO.6 You are managing a Storage Foundation 5.0 server that has Storage Foundation Management
Server (SFMS) software installed. You force a placement policy to a file system using the Storage
Foundation Management Server (SFMS).
What is the outcome when a policy is forced to a file system?
A. The current policies of the file system are overwritten by the SFMS policies.
B. The file system will retain its policies and discard the SFMS policies.
C. The file system will incorporate the changes of both the policies.
D. The file system will apply the SFMS policies only in the case where its own policies cannot be
assigned.
Answer: A
Symantec ST0-237 examen ST0-237 examen ST0-237 examen ST0-237
NO.7 After installing Veritas Enterprise Administrator, you start the VEA with the profile name that
you have specified.When you click the Console View, what does it display? (Select two.)
A. Active Events
B. Volume Summary
C. Alerts
D. Disk History
Answer: A,C
certification Symantec ST0-237 certification ST0-237 ST0-237
NO.8 You have a nonredundant concatenated volume named datavol in a disk group named datadg.
The volume has a file system on it. One of the underlying disks of the volume called datadg02 fails
temporarily due to a power failure. You fix the problem of the power failure, and ensure that the
disk is powered back again. You ensure that both the system and VxVM can see the disk again. Then,
you reattach the disk back to the disk media record.
Which command will you execute next to be able to run fsck on the file system?
A. vxvol -g datadg start datavol
B. vxrecover -s datavol
C. vxrecover -ns
D. vxvol -g datadg -f start datavol
Answer: D
Symantec certification ST0-237 certification ST0-237 ST0-237 examen
NO.9 When you attempt to start the RAID-5 volume, you are prompted with an error message
"VxVM ERROR V-5-1-1237 Volume r5vol is not startable; some subdisks are unusable and the parity
is stale." You want to remove this error and start the RAID-5 volume.
How will you ensure that you do not encounter this error again?
A. Use a single RAID-5 log plex in RAID-5 volumes.
B. Change the subdisks.
C. Use two or more RAID-5 log plexes in RAID-5 volumes.
D. Reattach the subdisks.
Answer: C
Symantec ST0-237 examen ST0-237 ST0-237 examen ST0-237 examen
NO.10 An incorrectable I/O error has occurred on a RAID volume due to a disk failure that caused
the data on the disk to become unavailable. For the RAID volume, the subdisk becomes unavailable
and is considered stale and detached.What is the RAID level in the volume in this situation?
A. 0
B. 2
C. 4
D. 5
Answer: D
Symantec ST0-237 ST0-237 ST0-237 examen certification ST0-237
NO.11 Which is a limitation of using CDS disk layout under VxVM 4.0 or above?
A. The CDS format cannot contain a private region and a public region on a single partition.
B. The CDS format cannot be used with hardware RAID controllers.
C. The CDS format cannot be used in conjunction with OS-level partitioning.
D. The CDS format cannot be used for boot disks.
Answer: D
Symantec examen certification ST0-237 ST0-237 examen certification ST0-237
NO.12 You need to create a new volume. The new volume will only use disks on controller 1. You
want to execute the vxassist command with the ctlr:c1 storage attribute. You want to ensure that
the command provides desired output.
What should you ensure to meet the required goal?
A. Ensure that storage attribute is a part of the disk group.
B. Ensure that storage attribute is a part of the plex.
C. Ensure that storage attribute is a part of the disk.
D. Ensure that storage attribute is a part of the volume.
Answer: A
Symantec certification ST0-237 ST0-237 ST0-237
NO.13 You have a system that has two disks-disk01 and disk02, which are mapped into the system
configuration during boot as disks c0t0d0s2 and c0t1d0s2, respectively. A failure has caused disk01
to become detached.What would you do to view the status of the failed disk01?
A. Use the vxdg list command
B. Use the vxdg -s list command
C. Use the vxprint command
D. Use the vxdisk list command
Answer: D
certification Symantec ST0-237 examen ST0-237 examen ST0-237 examen certification ST0-237 ST0-237
NO.14 You need to create a volume for the HR department. You need to mount a file system with a
high demand for I/O throughput. You are aware that spanning the volume across multiple disks will
increase the I/O performance.Which risk should you be aware of when spanning the volume across
multiple disks?
A. Write throughput degradation
B. Single disk failure causes volume failure
C. Requirement for disk redundancy
D. Poor I/O performance
Answer: B
Symantec examen ST0-237 ST0-237 examen ST0-237 ST0-237
NO.15 In System Overview, the status of a detection server is shown as 'unknown'. Examination of
the detection server reveals all Vontu services are running.
Which port is blocked and causing the server to be in the 'unknown' state?
A. 443
B. 8000
C. 8100
D. 8300
Answer: C
Symantec certification ST0-237 certification ST0-237 certification ST0-237 ST0-237 examen
NO.16 Which rule will you use to discover disabled controllers failures in the Storage Foundation
5.0 environment?
A. vxse_host
B. vxse_disk
C. vxse_disklog
D. vxse_dc_failures
Answer: D
Symantec examen ST0-237 examen ST0-237
NO.17 Which valid automated response option should an administrator choose for Email Prevent?
A. modify the message subject or add specific RFC-2822 headers
B. add metadata to email headers of confidential email
C. modify the body of email messages containing confidential data
D. process confidential email re-routed to a specified email list
Answer: A
certification Symantec ST0-237 certification ST0-237 certification ST0-237
NO.18 A DLP administrator needs to forward data loss incidents to the company's Security
Information and Event Management (SIEM) system.Which response rule action provides the
administrator with the ability to accomplish this task?
A. All: Send Email Notification
B. All: Log to a Syslog Server
C. All: Add Note
D. All: Set Attribute
Answer: B
certification Symantec ST0-237 certification ST0-237 ST0-237 examen
Le test Certification Symantec ST0-237 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Symantec ST0-237. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Symantec ST0-237.
没有评论:
发表评论