Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de HP après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
Beaucoup de gens trouvent difficile à passer le test HP HP0-Y30, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test HP HP0-Y30 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Code d'Examen: HP0-Y30
Nom d'Examen: HP (Implementing HP Networking Technologies)
Questions et réponses: 137 Q&As
Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test HP HP0-Y30, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test HP HP0-Y30 coûtant un peu d'argent.
Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.
Votre vie changera beaucoup après d'obtenir le Certificat de HP HP0-Y30. Tout va améliorer, la vie, le boulot, etc. Après tout, HP HP0-Y30 est un test très important dans la série de test Certification HP. Mais c'est pas facile à réussir le test HP HP0-Y30.
HP0-Y30 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y30.html
NO.1 You have initiated a console session on an HP A-Series switch at default settings. What is your
privilege level?
A. Visit (0)
B. Monitor (1)
C. System (2)
D. Manage (3)
Answer: D
certification HP HP0-Y30 HP0-Y30 HP0-Y30
NO.2 Click the Exhibit button.
Which statement accurately describes the state of Gigabit Ethernet 3/0/12 in the HP A-Series switch
configuration shown in the exhibit?
A. The interface will be a tagged member of VLAN 12.
B. The interface will be an untagged member of VLAN 1.
C. The interface will be an untagged member of VLAN 12.
D. The interface will drop all incoming packets for VLAN 12.
Answer: C
HP HP0-Y30 HP0-Y30 HP0-Y30
NO.3 You must configure VLANs and ports on an HP A7500 switch at default settings. What is the effect of
the following commands?
[SW-Gigabit-Ethernet1/0/1]port link-type trunk [SW-Gigabit-Ethernet1/0/1]port trunk permit vlan 100 101
A. The switch will forward traffic for VLANs 100 and 101 with 802.1Q tags. Traffic for VLAN 1 will be
untagged. Traffic for all other VLANs will be discarded.
B. The switch will add port 1/0/1 to a Link Aggregation Group (LAG) that is a tagged member of VLANs
100 and 101.
C. The switch will forward traffic for VLANs 100 and 101, but will discard traffic for all other VLANs.
D. The switch will forward VLAN 101 traffic with 802.1Q tags. VLAN 100 traffic will be untagged.
Answer: A
HP examen HP0-Y30 HP0-Y30 HP0-Y30
NO.4 You must reset the startup configuration of an HP A-Series switch to factory defaults. Which CLI view
will enable you to complete this task?
A. manager view
B. global configuration view
C. system view
D. user view
Answer: D
HP HP0-Y30 HP0-Y30
NO.5 Which HP E-Series switch models are fixed-port switches? (Select two.)
A. E8212 zl
B. E4204 vl
C. E6600-24G
D. E5406 zl
E. E3500-48G yl
Answer: CE
HP HP0-Y30 HP0-Y30 HP0-Y30
NO.6 Which interface is available for managing A-Series switches at factory default settings?
A. Telnet
B. menu
C. console
D. web
Answer: C
HP certification HP0-Y30 certification HP0-Y30 HP0-Y30 HP0-Y30
NO.7 Which HP E-Series switch features redundant management and fabric modules?
A. E2910 al
B. E8212 zl
C. E5412 zl
D. E4208 vl
Answer: B
HP examen HP0-Y30 HP0-Y30 certification HP0-Y30
NO.8 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch?
Switch(vlan-100)# end
"Pass Any Exam. Any Time." - www.actualtests.com 3
A. The CLI displays the Operator prompt.
B. The CLI displays the Manager prompt.
C. VLAN 100 is deleted from the switch.
D. The CLI displays the global configuration prompt.
Answer: D
HP HP0-Y30 HP0-Y30 examen HP0-Y30 examen
NO.9 Which A-Series switch is designed for the large data center and the enterprise core?
A. A5820
B. A7500
C. A9500
D. A12500
Answer: D
HP examen HP0-Y30 examen HP0-Y30 examen HP0-Y30 certification HP0-Y30
NO.10 You must configure a port on an A5800 switch to support protocol-based VLANs and port-based
VLANs. Which port type supports this requirement?
A. hybrid
B. access
C. aggregated
D. trunk
E. tagged
Answer: A
certification HP HP0-Y30 HP0-Y30 examen
NO.11 You have entered the following command at the CLI of an HP E5400 zl Series switch. Switch(vlan-1)# ip
address 192.168.1.225/24
The switch's other VLAN and IP parameters are at factory defaults. While testing this configuration, you
find that the switch cannot ping a server located at 192.168.2.22. You have confirmed the server is up and
available. This server is located in a data center not directly connected to your switch.
What must you configure on the switch to enable connectivity between these two devices?
A. Add a default gateway.
B. Modify the IP address to 192.168.1.225/26.
C. Enable IP routing.
D. Add the server to allowed hosts list.
Answer: A
HP certification HP0-Y30 HP0-Y30 examen HP0-Y30 certification HP0-Y30
NO.12 Which view is indicated by the following prompt on an HP A7500 switch? <A7500>
A. system
B. operator
C. user
D. console
Answer: C
HP HP0-Y30 HP0-Y30 examen HP0-Y30
NO.13 What is a fit Access Point?
A. an AP that can provide WLAN services without a controller
B. an AP that has no intelligence and requires a wireless controller
C. an AP that can be deployed autonomously or with a controller
D. an AP that provides some intelligence under the management of a controller
Answer: D
HP examen HP0-Y30 examen certification HP0-Y30 HP0-Y30 HP0-Y30 examen
NO.14 You must define a hostname on an HP E5400 zl Series switch. Which configuration context must you
enter to perform this task?
A. manager
B. system
C. administrator
D. global configuration
Answer: D
HP HP0-Y30 certification HP0-Y30 certification HP0-Y30 HP0-Y30 HP0-Y30
NO.15 At the CLI of an HP E5406 zl switch, you have assigned ports A1-A4 to VLAN 70 as untagged
members. All other configuration parameters on the E5406 zl are at default settings. The E5406 zl is
connected through port B1 to an HP E8212 zl switch. The E8212 zl has been configured with an IP
interface associated with VLAN 70, and IP routing has been enabled. On the E5406 zl, what must you do
to enable the E8212 zl to act as default gateway for VLAN 70 clients?
A. Define an IP interface in VLAN 70.
B. Configure port B1 to be a member of VLAN 70.
C. Define the VLAN 70 IP address of the E8212 zl as the default gateway.
D. Add a static route to the E8212 to the E5406 zl route table.
Answer: B
HP examen HP0-Y30 HP0-Y30 HP0-Y30 examen
NO.16 You have uploaded an application file named "A12500.bin" to an HP A12500 switch.
Which command ensures this file is used during the next boot cycle?
A. boot-file cf:/A12500.bin main
B. load appfile cf:/A12500.bin main
C. boot-loader file cf:/A12500.bin main
D. set boot file cf:/A12500.bin main
Answer: C
HP examen HP0-Y30 HP0-Y30 examen HP0-Y30 HP0-Y30 examen certification HP0-Y30
NO.17 What is the effect of the following command entered at the CLI of an HP E3500 yl switch?
E3500(vlan-44)#interface 23
A. The CLI displays the status of port 23.
B. Port 23 becomes a member of VLAN 44.
C. Port 23 is enabled.
D. The CLI enters the configuration context for port 23.
Answer: D
HP certification HP0-Y30 HP0-Y30 examen HP0-Y30 certification HP0-Y30
NO.18 Which type of port can handle more than one untagged VLAN on an HP A-Series switch?
A. trunk
B. access
C. aggregated
D. hybrid
Answer: D
HP HP0-Y30 HP0-Y30 examen HP0-Y30 examen
NO.19 You must configure SSH on an HP A7500 switch. Which item must be generated on the switch?
A. passphrase
B. shared secret
C. self-signed certificate
D. encryption keys
Answer: D
HP HP0-Y30 certification HP0-Y30 HP0-Y30 HP0-Y30 examen
NO.20 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch at
factory default settings.?
Switch# exit
A. The user is logged out of the console.
B. The privilege level moves from manager to operator.
C. Unsaved configuration changes are deleted.
D. The user exits from configuration mode.
Answer: B
HP HP0-Y30 certification HP0-Y30 HP0-Y30 examen
Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification HP HP0-Y30 via son guide d'étude. Est-ce que vous vous souciez de test Certification HP HP0-Y30? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.
没有评论:
发表评论